240kWh Vestwoods C&I Outdoor Battery Cabinet – Commercial Energy Storage

The 240kWh Vestwoods C&I Outdoor Battery Cabinet is a high-capacity energy-storage solution designed for commercial, industrial and institutional facilities. It provides a flexible platform for storing renewable energy, increasing solar self-consumption, managing peak electricity demand and strengthening backup-power capability.

With 240kWh of nominal energy storage, the cabinet is suitable for facilities with substantial daily power requirements. Stored energy can be used at night, during peak-demand periods or when grid electricity is unavailable, depending on the connected loads and final system configuration.

Its outdoor cabinet configuration offers installation flexibility where a dedicated indoor battery room is unavailable or unsuitable. The cabinet must be installed on a professionally prepared, secure and properly drained outdoor site in accordance with Vestwoods requirements and the approved engineering design.

When integrated with a correctly selected Power Conversion System (PCS) or compatible inverter, the battery cabinet can support essential equipment, improve facility-wide energy management and reduce dependence on grid electricity. Final system sizing should consider the facility’s load profile, required backup duration, available solar capacity and operating strategy.

Macire can assist with site assessment, load profiling, system design, compatible equipment selection and preparation of a project-specific quotation.

Technical Specifications

Key Features

• High-capacity 240kWh nominal energy storage
• Outdoor cabinet configuration for flexible site planning
• Designed for commercial, industrial and institutional applications
• Suitable for integration with professionally engineered solar-power systems
• Stores available renewable energy for later use
• Supports increased solar self-consumption
• Can support peak-load shifting and electricity-demand management
• Provides backup-power capability when correctly configured
• Suitable for new energy projects and selected system upgrades
• Quiet energy-storage operation
• Project-specific configuration based on the facility’s requirements
• Professional system design, installation and technical support available from Macire

Applications / Use Cases

🏭 Factories and manufacturing facilities
🏢 Offices and commercial buildings
🏨 Hotels, lodges and hospitality facilities
🏥 Hospitals and healthcare institutions
🏫 Schools, universities and training institutions
🏬 Shopping centres and retail developments
📦 Warehouses and distribution centres
🌾 Farms and agro-processing facilities
☀️ Commercial solar-energy storage
📊 Peak-load shifting and energy management
⚡ Essential-load backup power
🔌 Renewable-energy integration projects

Installation Notes

• A professional site assessment and load analysis should be completed before ordering
• The installation site must provide adequate space, structural support and maintenance access
• A suitably engineered, strong and level concrete foundation should be prepared
• The cabinet should be positioned in a secure and access-controlled outdoor location
• Manufacturer-recommended operating, ventilation and maintenance clearances must be maintained
• The installation site should not be vulnerable to flooding, standing water or accidental vehicle impact
• Suitable drainage, security barriers and site-specific weather considerations should be incorporated
• The battery cabinet must be correctly matched with the selected PCS or inverter
• Appropriately rated DC and AC cabling, isolation, switchgear and protection equipment are required
• Proper earthing, surge protection and emergency isolation must be incorporated
• Suitable fire-detection and site-specific fire-safety provisions should be provided
• Installation and commissioning must be completed by qualified professionals
• Transport, offloading, civil works, installation and commissioning are quoted according to the project location and scope
• The final installation must comply with applicable Vestwoods technical requirements

Care & Maintenance

• Keep the cabinet and surrounding installation area clean and unobstructed
• Restrict access to trained and authorised personnel
• Regularly monitor battery status, operating conditions and system alarms
• Periodically inspect cables, terminals, isolators and protection equipment
• Keep ventilation openings and maintenance clearances unobstructed
• Check the installation area for water accumulation, debris and physical damage
• Operate the system within its approved design limits
• Do not open or modify the cabinet without authorised technical support
• Periodically test emergency-isolation and fire-safety provisions
• Arrange scheduled technical inspections and preventive maintenance
• Follow the official Vestwoods installation, operation and maintenance instructions

Mini FAQ

Q1: What is the storage capacity of this battery cabinet?
The system provides 240kWh of nominal battery-energy storage for commercial and industrial applications.

Q2: How long can it provide backup power?
Backup duration depends on the connected load, usable battery energy, conversion efficiency and configured operating limits. Macire can prepare a project-specific runtime estimate after assessing the facility’s essential loads.

Q3: Can it work with solar panels?
Yes. The cabinet can form part of a professionally engineered commercial solar system and store available solar energy for later use.

Q use4: Can it help reduce electricity costs?
A correctly designed system can increase solar self-consumption and support peak-load management. Actual savings depend on the facility’s consumption profile, available solar generation, electricity tariff and operating strategy.

Q5: Is the cabinet suitable for outdoor installation?
Yes. This listing is for the outdoor configuration. The site must still be professionally prepared with suitable structural support, drainage, access control and safety provisions.

Q6: Can it power an entire commercial or industrial facility?
This depends on the facility’s total load, required backup duration and the output capacity of the selected PCS or inverter. A professional load assessment is required before final sizing.

Q7: Does the cabinet include a PCS or inverter?
The PCS or inverter is selected and quoted separately unless expressly included in Macire’s formal quotation.

Q8: Is installation included in the equipment price?
Transport, offloading, civil works, cabling, switchgear, protection equipment, installation and commissioning are quoted separately unless expressly included in Macire’s formal quotation.

Q9: Can the system be expanded later?
Expansion may be possible, subject to battery compatibility, the selected PCS or inverter, available site infrastructure and an approved engineering design.

Why Buy from Macire

• Genuine Vestwoods commercial energy-storage solutions
• Professional site assessment and load-profiling support
• Project-specific solar and backup-power system design
• Assistance with compatible equipment and protection-system selection
• Professional installation and commissioning coordination
• Transparent project-specific quotations
• Reliable technical guidance and after-sales support
• Trusted Kenyan power, machinery and water solutions partner

Order from Macire

Macire can assist with site assessment, load profiling, equipment selection and preparation of a project-specific quotation for your commercial or industrial energy-storage requirements.

Visit us: Kenafric Business Park, Unit 5, Nairobi, Kenya
WhatsApp: 0750 006 600
Call: 0713 520 969 / 0718 762 530
Website: www.macire.co.ke