1.1kW (1.5HP) Doyin 4SDS5-1100W DC Borehole Submersible Water Pump – 5m³/h, 120m Head, Ordinary Impeller
KSh27,995.00KSh72,000.00 (-61%)
⚡ Power: 1.1kW (1.5HP) DC Motor
☀️ Recommended Panels: 3 × 550W Solar Panels
💧 Maximum Flow: 5m³/h or 5,000L/h
⬆️ Maximum Head: 120 Metres
🏠 Homes | 🚜 Farms | 🐄 Livestock | 🏫 Institutions
🛠 Ordinary Impeller and Submersible Borehole Design
⭐ Verified & Supported by Macire
You may also like
-
-
KSh19,450.00Inquire via WhatsApp
KSh48,799.00 -
-
-
KSh54,500.00Inquire via WhatsApp
KSh98,000.00
The 1.1kW (1.5HP) Doyin 4SDS5-1100W DC Borehole Submersible Water Pump is designed for dependable water pumping from deep boreholes using solar power. It offers a maximum flow capacity of 5m³/h, equivalent to 5,000 litres per hour, and a maximum pumping head of 120 metres.
The pump features an ordinary impeller configuration and an efficient DC motor suitable for homes, farms, livestock projects, institutions and off-grid water supply systems. For reliable operation under suitable sunlight conditions, the recommended solar configuration is 3 × 550W solar panels, providing a total rated solar capacity of 1,650W.
Macire verifies the pump specifications and provides technical guidance on solar-panel sizing, controllers, delivery pipes and installation accessories. Customers also benefit from nationwide delivery and dependable after-sales support.
⭐ Genuine Product | Verified & Supported by Macire
System Architecture and Configuration
DC Motor System
- Rated motor power: 1.1kW
- Equivalent output: 1.5HP
- Energy-efficient DC motor
- Designed for direct solar pumping
- Quiet operation with low maintenance requirements
Hydraulic Pump System
- Ordinary impeller configuration
- Multi-stage submersible pumping design
- Maximum flow capacity of 5m³/h
- Maximum head of 120 metres
- Suitable for deep boreholes and wells
Recommended Solar Configuration
- 3 × 550W solar panels
- Total recommended panel capacity: 1,650W
- Compatible DC solar pump controller
- Suitable for direct daytime solar operation
- Water storage tank recommended for use outside daylight hours
Construction
- Corrosion-resistant submersible pump body
- Durable internal pumping stages
- Vertical borehole installation
- Water-cooled motor operation
- Suitable for domestic and agricultural applications
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Doyin |
| Model | 4SDS5-1100W |
| Product Type | DC Borehole Submersible Water Pump |
| Rated Power | 1.1kW |
| Horsepower | 1.5HP |
| Maximum Flow Rate | 5m³/h |
| Maximum Water Output | 5,000 litres per hour |
| Maximum Head | 120 metres |
| Impeller Type | Ordinary Impeller |
| Power Source | Solar DC |
| Recommended Solar Panels | 3 × 550W |
| Total Recommended Solar Capacity | 1,650W |
| Controller Requirement | Compatible DC Solar Pump Controller |
| Installation Position | Vertical and fully submerged |
| Main Applications | Domestic, agricultural and institutional water supply |
Actual flow depends on total dynamic head, sunlight intensity, borehole conditions, pipe diameter and installation quality.
Key Features
- Efficient 1.1kW DC motor
- Equivalent to 1.5HP
- Maximum flow capacity of 5m³/h
- Pumps up to 5,000 litres per hour
- Maximum pumping head of 120 metres
- Recommended for 3 × 550W solar panels
- Ordinary impeller for reliable water pumping
- Suitable for remote and off-grid locations
- No fuel or grid electricity required
- Low-noise submersible operation
- Reduced operating and maintenance costs
- Verified and supported by Macire
Applications
🏠 Homes: Pumping borehole water into domestic storage tanks.
🚜 Farms: Water supply for crop irrigation and general farm use.
🐄 Livestock Projects: Filling animal drinking troughs and water tanks.
🌱 Irrigation: Supporting drip irrigation and small sprinkler systems.
🏫 Institutions: Water supply for schools, churches and community facilities.
🏥 Clinics: Filling storage tanks for general facility use.
🏢 Commercial Properties: Supplying water to offices, rental units and small businesses.
Installation and Engineering Notes
- Confirm the borehole depth, diameter and water level before installation.
- Calculate the total dynamic head rather than relying only on borehole depth.
- Install the pump fully submerged and above the borehole bottom.
- Use a strong safety rope or stainless-steel suspension cable.
- Connect the pump through a compatible DC solar pump controller.
- Use 3 × 550W solar panels installed in an unshaded position.
- Select the correct solar-cable and delivery-pipe sizes.
- Install dry-run protection where possible.
- Fit a non-return valve where required.
- Macire can provide technical guidance on correct system sizing.
Care, Maintenance and Operations
- Clean the solar panels regularly.
- Check pump cables and controller connections periodically.
- Prevent the pump from running without water.
- Inspect the delivery pipe for leaks or restrictions.
- Protect all electrical connections from moisture.
- Monitor the controller for fault indications.
- Avoid pumping water with excessive sand or sediment.
- Use compatible spares and technical support available through Macire.
Do’s and Don’ts
✅ Do’s
- Use the recommended 3 × 550W solar panels.
- Install a compatible solar pump controller.
- Confirm total dynamic head before installation.
- Use properly sized pipes and solar cables.
- Secure the pump with a reliable safety rope.
- Install dry-run protection.
- Keep the solar panels clean and unshaded.
❌ Don’ts
- Do not operate the pump in a dry borehole.
- Do not connect the pump directly without a suitable controller.
- Do not exceed the 120m maximum head.
- Do not place the pump directly on the borehole floor.
- Do not use damaged electrical cables.
- Do not use undersized delivery pipes.
- Do not expect 5m³/h output at the maximum head.
Compatibility
Compatible accessories and systems include:
- 3 × 550W solar panels
- Doyin-compatible DC solar pump controller
- Water-level sensors
- Dry-run protection sensors
- Float switches
- HDPE delivery pipes
- Water storage tanks
- Non-return valves
- Borehole safety ropes
- Solar-panel mounting structures
- Lightning and surge protection
- Macire-supplied pumping accessories
Performance Guidance
| Operating Condition | Expected Performance |
| Low pumping head and strong sunlight | Highest available water flow |
| Moderate pumping head | Stable water delivery |
| High pumping head | Reduced water output |
| Maximum 120m head | Minimum operating flow |
| Cloudy conditions | Reduced pumping capacity |
| Shaded or dirty panels | Lower pump performance |
The stated 5m³/h or 5,000L/h is the maximum flow capacity. Actual output varies with pumping head, sunlight, pipework and borehole conditions.
Mini FAQ
1. What is the maximum water output?
The pump can deliver up to 5m³/h, equivalent to 5,000 litres per hour, under suitable operating conditions.
2. What is the maximum pumping head?
The pump has a maximum head rating of 120 metres.
3. How many solar panels are recommended?
The recommended configuration is 3 × 550W solar panels, providing a total rated capacity of 1,650W.
4. Can the pump operate at night?
It primarily operates when sufficient solar power is available. A storage tank is recommended so water pumped during the day can be used at night.
5. Does Macire provide delivery and technical support?
Yes. Macire provides nationwide delivery and guidance on panels, controllers, pipes and installation accessories.
Why Buy from Macire
- Genuine Doyin borehole pumps
- Product verification before dispatch
- Correct solar-panel sizing guidance
- Compatible controllers and accessories
- Technical support before installation
- Kenya-wide delivery
- Guidance on pipe and cable selection
- After-sales service
- Spare-parts support
- Trusted Kenyan equipment supplier
Macire – Inspired Living. ✨



















Reviews
There are no reviews yet.