62m AKCP200 Aico Japan Booster Pump – 4HP, 1.25 Inches, 250L/min, Single Phase

The 62m AKCP200 Aico Japan Booster Pump is a heavy-duty water pressure boosting solution engineered for residential, commercial, agricultural and institutional water supply systems. Powered by a robust 4HP single-phase electric motor, it delivers the pressure and high water volume required for demanding water transfer and distribution applications.

With a maximum pumping head of 62 metres and a maximum flow rate of 250 litres per minute, the AKCP200 is suitable for filling elevated storage tanks, boosting pressure in large buildings, distributing water across farms and supplying several water outlets simultaneously. Its 1.25-inch inlet and outlet connections support efficient water movement through compatible plumbing systems.

The powerful single-phase configuration provides heavy-duty pumping performance in locations where three-phase electricity may not be available. This makes the AKCP200 suitable for large homes, apartments, hotels, schools, hospitals, farms, institutions and commercial premises.

Supplied and verified by Macire, this pump is selected for dependable operation under Kenyan water supply conditions. Macire provides technical guidance, genuine products, nationwide delivery and reliable after-sales support.

⭐ Genuine Product | Verified & Supported by Macire

System Architecture & Configuration

Motor System

• Powerful 4HP electric motor
• Single-phase power configuration
• Air-cooled motor design
• Efficient electrical operation
• High starting and running capacity
• Designed for demanding pressure-boosting applications

Hydraulic System

• Maximum pumping head of 62 metres
• Maximum flow rate of 250L/min
• 1.25-inch suction connection
• 1.25-inch discharge connection
• Centrifugal water pumping mechanism
• High-volume water transfer capability
• Stable pressure across compatible water systems

Construction

• Heavy-duty pump housing
• Durable electric motor casing
• Strong suction and discharge ports
• Corrosion-resistant external finish
• Stable mounting base
• Robust construction for demanding installations

Safety & Operation

• Enclosed rotating pump components
• Motor cooling ventilation
• Stable fixed-installation design
• Suitable for clean-water applications
• Compatible with suitable electrical protection devices
• Designed for controlled residential and commercial water systems

Technical Specifications

Typical operating conditions recommended by Macire.

Key Features

• Powerful 4HP single-phase electric motor
• Maximum pumping head of 62 metres
• High water flow of up to 250L/min
• Large 1.25-inch inlet and outlet connections
• Strong water pressure for demanding installations
• Efficient centrifugal pumping mechanism
• Suitable for elevated water storage tanks
• Supports several water outlets
• Heavy-duty pump and motor construction
• Reliable air-cooled electric motor
• Suitable for large residential and commercial systems
• Ideal for irrigation and agricultural water distribution
• High-volume tank-filling capability
• Easy integration into compatible plumbing systems
• Verified and supported by Macire

Applications

🏠 Large residential homes

🏢 Apartments and multi-storey buildings

🏨 Hotels, lodges and resorts

🏫 Schools, colleges and universities

🏥 Hospitals and healthcare facilities

🌾 Farm water distribution

🌿 Irrigation and sprinkler systems

🚿 Multiple bathrooms and water outlets

🏭 Commercial water transfer

💧 Elevated storage tank filling

🏛 Government and institutional facilities

🏘 Estates and gated communities

🐄 Livestock watering systems

🏗 Construction site water supply

Installation & Engineering Notes

• Install the pump on a firm, dry and level foundation.
• Use correctly sized 1.25-inch suction and discharge pipes.
• Avoid reducing the suction pipe diameter.
• Keep the suction pipe as short and direct as possible.
• Ensure all suction pipe connections are completely airtight.
• Install a suitable foot valve or non-return valve where required.
• Fit a suction strainer to prevent debris from entering the pump.
• Prime the pump completely before the first operation.
• Do not operate the pump without water.
• Confirm that the electricity supply matches the single-phase motor requirements.
• Use a correctly rated circuit breaker, isolator and motor protection device.
• Due to the 4HP motor capacity, confirm that the electrical circuit can support the starting current.
• Ensure electrical installation is completed by a qualified technician.
• Protect the motor from rain, flooding and direct water exposure.
• Allow sufficient ventilation around the motor.
• Macire can provide technical guidance and product support.

Care, Maintenance & Operations

• Inspect the pump regularly for water leakage.
• Check electrical cables and terminals periodically.
• Clean the suction strainer when required.
• Keep motor ventilation openings clean and unobstructed.
• Inspect pipe connections for air entry and water loss.
• Avoid pumping water containing sand, mud or abrasive particles.
• Stop the pump immediately if unusual noise, vibration or overheating occurs.
• Inspect mechanical seals during routine servicing.
• Protect the pump from flooding and direct rainfall.
• Tighten mounting bolts and pipe fittings periodically.
• Check the non-return valve for correct operation.
• Service the pump according to usage and operating conditions.
• Genuine spare parts and technical support are available through Macire.

Do’s & Don’ts

✅ Do’s

• Prime the pump before starting.
• Install the pump on a solid foundation.
• Use the recommended pipe diameter.
• Ensure suction connections are airtight.
• Use clean water only.
• Install suitable electrical protection.
• Confirm adequate electrical supply capacity.
• Inspect the pump regularly for leaks.
• Follow recommended maintenance intervals.
• Use genuine replacement parts.
• Consult Macire for technical guidance.

❌ Don’ts

• Do not run the pump dry.
• Do not pump muddy, sandy or chemically aggressive water.
• Do not expose the electric motor to rain or flooding.
• Do not use damaged electrical cables.
• Do not connect the pump to an undersized electrical circuit.
• Do not block the motor ventilation openings.
• Do not exceed recommended operating conditions.
• Do not install undersized suction pipes.
• Do not operate the pump with leaking pipe connections.
• Do not switch the pump repeatedly within short intervals.
• Do not service the pump while it is connected to electricity.

Compatibility

Compatible with:

• 1.25-inch water pipes
• Elevated water storage tanks
• Ground-level storage tanks
• Automatic pump controllers
• Pressure control switches
• Pressure tanks
• Non-return valves
• Foot valves
• Suction strainers
• Irrigation networks
• Sprinkler systems
• Commercial plumbing networks
• Institutional water distribution systems
• Agricultural water supply systems
• Genuine Macire replacement parts

Performance Table

Performance depends on suction depth, pipe diameter, pipe length, elevation, system resistance and proper maintenance as recommended by Macire.

Frequently Asked Questions

1. Is the AKCP200 suitable for residential water pressure boosting?

Yes. It is suitable for large homes, apartments and estates that require strong pressure across several water outlets.

2. Can it pump water to an elevated storage tank?

Yes. Its maximum head of 62 metres makes it suitable for elevated tank supply, subject to the actual elevation, pipe length and installation conditions.

3. Is the AKCP200 a single-phase pump?

Yes. This version operates on a single-phase electrical supply.

4. What is its maximum flow rate?

The AKCP200 delivers a maximum flow rate of up to 250 litres per minute.

5. What pipe size does the pump use?

It uses 1.25-inch suction and discharge connections.

6. Can it supply several water outlets simultaneously?

Yes. Its powerful 4HP motor and high flow capacity make it suitable for supplying several outlets when the system is correctly designed and installed.

7. Can the pump be used for irrigation?

Yes. It is suitable for farm irrigation, sprinkler systems, garden watering and general agricultural water distribution.

8. Does the pump require special electrical installation?

The pump uses single-phase electricity, but its 4HP motor requires an appropriately rated electrical circuit, protection devices and professional installation.

9. Can it pump dirty water?

No. The AKCP200 is designed for clean water. Sand, mud and abrasive particles may damage its internal components.

10. Can Macire deliver nationwide?

Yes. Macire offers delivery throughout Kenya.

11. Are spare parts available?

Yes. Genuine spare parts and technical support are available through Macire.

12. Does Macire provide after-sales support?

Yes. Macire provides technical guidance, product verification and reliable after-sales support.

Why Buy from Macire

• Genuine Aico Japan products
• Product verification before dispatch
• Nationwide delivery across Kenya
• Technical product guidance
• Genuine spare parts support
• Reliable after-sales service
• Experienced technical team
• Trusted Kenyan water equipment supplier
• Competitive pricing
• Long-term customer support

Macire – Inspired Living. ✨