5m³/h 235m Doyin 3HP AC/DC Hybrid Solar Borehole Pump System Kit 4SDS5-2200W AD

The 5m³/h 235m Doyin 3HP AC/DC Hybrid Solar Borehole Pump System Kit 4SDS5-2200W AD is a powerful high-head pumping package designed for demanding borehole installations where water must be lifted over a substantial total pumping head.

Powered by the Doyin 4SDS5-2200W AD 3HP AC/DC Hybrid borehole pump, the system delivers a maximum flow rate of 5m³/h and reaches a substantial 235-metre maximum head. Its combination of moderate flow and very high head makes this configuration particularly relevant for deep-water projects, challenging terrain and borehole-to-elevated-tank applications.

The solar side consists of six 590W panels, providing a total nominal PV array capacity of 3.54kWp. The system also includes an extended 255 metres of 2.5mm² 4-core submersible cable, 30 metres of 6mm² PV cable and one cable-splicing kit.

The AC/DC Hybrid configuration differentiates the 4SDS5-2200W AD from DC-only solar pumps, providing an alternative power-input arrangement. Exact AC and DC input requirements and operating arrangements should follow Doyin’s technical specifications for this model.

Actual water output depends on borehole yield, total dynamic head, pipe diameter, delivery distance, available power, solar conditions and installation quality. The 5m³/h maximum flow and 235m maximum head are different operating points and should not be expected simultaneously.

Technical Specifications

Kit Contents

• One Doyin 4SDS5-2200W AD 3HP AC/DC Hybrid borehole pump
• Six 590W solar panels
• 255m of 2.5mm² 4-core submersible cable
• 30m of 6mm² PV cable
• One cable-splicing kit

Key Features

• 3HP / 2200W AC/DC Hybrid borehole pump for demanding solar water-pumping projects.
• Reaches an impressive 235m maximum head, making high-head capability a defining feature of this kit.
• Delivers up to 5m³/h maximum flow under suitable operating conditions.
• AC/DC Hybrid configuration provides a different power arrangement from DC-only borehole pumps.
• Six 590W solar panels provide a substantial 3.54kWp solar array.
• Supplied with an extended 255m of 2.5mm² 4-core submersible cable.
• Includes 30m of 6mm² PV cable, providing more solar-side cable length for the specified installation package.
• Includes one cable-splicing kit.
• Particularly suited to projects where high water-lifting capability is more critical than very high flow volume.
• Suitable for borehole-to-tank systems involving significant elevation or pumping head.

Applications / Use Cases

💧 High-Head Borehole Pumping – the 235m maximum head makes the 4SDS5-2200W AD particularly relevant for demanding borehole water-lifting projects.

🏔️ High-Elevation Tank Filling – suitable where water must travel from a borehole to a storage tank located considerably above the pumping water level.

🚜 Farm Water Supply – useful for transferring borehole water to farm storage tanks and distribution points where the calculated head falls within the pump’s performance.

🐄 Livestock Water Systems – suitable for filling storage tanks that supply livestock troughs and watering points.

🏠 Domestic & Institutional Water Storage – can support borehole-to-storage applications where the required flow and total dynamic head are appropriately matched.

🌱 Small-Scale Irrigation – suitable where irrigation demand can be served by the pump’s available flow and pressure at the actual operating head.

🔄 AC/DC Hybrid Pumping – specifically suited to projects where an AC/DC hybrid pump configuration is preferred rather than relying exclusively on DC solar operation.

☀️ Solar Water Projects – supplied with 3.54kWp of solar-panel capacity for operation under suitable solar conditions.

Installation Notes

A professional borehole and hydraulic assessment is particularly important for this 235m-head Doyin pump system. The assessment should establish borehole depth, static water level, dynamic water level, borehole yield, required daily water volume, tank elevation, delivery distance and pipe diameter.

The 235m maximum head is not the same as a 235m recommended pump installation depth. A separate recommended installation-depth range was not supplied for this kit and should therefore be determined from the actual borehole and project conditions.

Correct sizing should be based on total dynamic head (TDH). TDH includes the vertical distance from the pumping water level to the delivery point together with additional losses through the pipe, valves, bends, fittings and other restrictions.

The six supplied panels provide:

6 × 590W = 3,540W = 3.54kWp

The panels should be installed in an unshaded position with appropriate orientation and secure mounting. The exact series/parallel configuration should be selected according to the electrical input requirements of the 4SDS5-2200W AD rather than panel wattage alone.

Because this is an AC/DC Hybrid system, both the AC-side and DC-side connections, protection and operating arrangements should comply with the exact Doyin requirements for this model.

The supplied 255m of 2.5mm² 4-core submersible cable provides substantial cable length for the package. However, cable length does not determine recommended pump depth. The required cable length should be checked against the actual pump position and site layout.

The 30m of 6mm² PV cable should be appropriately routed and protected between the solar array and pumping equipment. Submerged cable connections should be completed using the supplied splicing kit and appropriate waterproofing methods.

Installation scope, pipework and any additional site-specific components should be confirmed in the final Macire quotation.

Care & Maintenance

• Keep all six 590W solar panels clean and free from shading.
• Inspect the solar-panel mounting system and PV connections periodically.
• Protect the 255m submersible cable against abrasion and damage during installation.
• Inspect the 30m PV cable and exposed electrical connections periodically.
• Check both AC and DC electrical protection and connections.
• Inspect delivery pipes, valves and fittings for leaks or restrictions.
• Monitor borehole water levels and avoid pumping below the safe operating water level.
• Monitor changes in water output, especially during different solar conditions.
• Investigate reduced flow by checking borehole yield, water level, pipework, TDH and solar conditions before assuming a pump fault.
• Have electrical and pumping faults inspected by a qualified technician.
• Follow Doyin operating and maintenance requirements for the 4SDS5-2200W AD.

Mini FAQ

What is the maximum flow rate?

The Doyin 4SDS5-2200W AD has a maximum flow rate of 5m³/h. Actual water delivery depends on the operating head, borehole conditions, pipework and available power.

What is the maximum head?

The pump reaches a substantial 235 metres maximum head, making high-head pumping the major strength of this particular 3HP configuration.

Will it deliver 5m³/h at 235m?

This should not be assumed. 5m³/h maximum flow and 235m maximum head represent different operating points. Actual flow at the project’s specific head should be established from the appropriate pump performance data.

Does the 235m head mean the pump can be installed 235m deep?

No. Maximum head is not the same as recommended installation depth. Pump depth should be determined from static and dynamic water levels, borehole yield and the project’s total dynamic head.

What power is the pump?

The pump is specified as 3HP / 2200W.

What does AC/DC Hybrid mean?

The 4SDS5-2200W AD is specifically an AC/DC Hybrid pump. This differentiates it from a DC-only solar pump and provides a different power-input configuration. Exact AC/DC operating requirements should follow Doyin’s specifications.

How many solar panels are supplied?

The kit contains six 590W solar panels.

What is the total solar capacity?

The six panels provide:

6 × 590W = 3,540W = 3.54kWp.

How much submersible cable is included?

The package contains 255 metres of 2.5mm² 4-core submersible cable.

How much PV cable is supplied?

The system includes 30 metres of 6mm² PV cable.

Is a cable-splicing kit included?

Yes. The package includes one cable-splicing kit.

Is this suitable for elevated tank filling?

Yes, provided the complete total dynamic head—including pumping water level, tank elevation and pipe friction—falls within the pump’s available performance.

Why Buy from Macire

• Genuine Doyin equipment supplied as a complete AC/DC hybrid solar pumping package
• Professional borehole-pump selection and sizing guidance
• Project-specific solar and water-system design support
• Transparent equipment and installation quotations
• Professional installation and commissioning coordination
• Reliable technical guidance and after-sales support
• Convenient shopping at Macire’s Nairobi showroom
• Trusted Kenyan power, machinery and water solutions partner

Order from Macire

Contact Macire for borehole assessment, pump sizing, system selection, ordering and professional installation coordination.

Visit us: Kenafric Business Park, Unit 5, Nairobi, Kenya
WhatsApp: 0750 006 600
Call: 0713 520 969 / 0718 762 530
Website: Macire