???? 3HP Aico Japan WQD10-36 Sewage Submersible Pump – 2.2KW, 50m Head, Single Phase ⚡????

???? High-power 3HP sewage pump for heavy-duty drainage!
⚡ Single-phase motor – easy, plug-and-play setup.
???? Lifts water & sewage up to 50 metres efficiently.
???? Ideal for homes, industries, farms & construction sites.
???? Japanese engineering with cast iron durability & non-clog impeller.
✅ Macire quality – built tough for long-lasting pumping solutions!

⚙️ Key Technical Specifications

• Brand/Model: Aico Japan – WQD10-36-2.2KW

• Motor Power: 3HP (2.2KW)

• Voltage/Phase: 220–240V / Single Phase / 50Hz

• Max. Head Lift: 50 metres

• Max. Flow Rate: ~10 m³/hr (approx.)

• Pump Type: Submersible Sewage Pump (Non-clog impeller)

• Material: Heavy-duty cast iron body with anti-rust coating

• Outlet Size: 2″–3″

• Weight: ~35–40Kg

???? Applications & Use Areas

✔️ Domestic sewage & drainage – septic tanks, sumps, basements ????
✔️ Construction sites – dewatering muddy pits & trenches ????
✔️ Agriculture – irrigation from ponds, slurry handling ????
✔️ Industrial wastewater – sludge & effluent management ????
✔️ Flood emergencies – rapid pumping in flooded compounds ????

???? Maintenance Tips

???? Keep pump fully submerged while operating ????
???? Clean strainer & impeller often to prevent clogging ????
???? Check cables, seals & bearings periodically ????
???? Use correct voltage & ensure proper earthing ⚡
???? Store in cool, dry area when idle ????

???? DIY Guide – Quick Setup

1️⃣ Place pump upright in sewage/water pit ????
2️⃣ Connect discharge hose or pipe firmly ????
3️⃣ Plug into a single-phase 220V outlet ⚡
4️⃣ Switch ON – pump self-primes & starts draining ????
5️⃣ Monitor flow & avoid running without water ????

⚠️ Do’s & Don’ts

✅ Do use for sewage, flood water, irrigation & construction drainage
✅ Do install overload protection for safety
❌ Don’t pump corrosive acids, oils or flammable liquids
❌ Don’t run pump dry – it damages motor seals
❌ Don’t exceed rated head/flow capacity

❓ FAQs

Q: Can this pump handle solid waste?
A: Yes – built with a non-clog impeller for sewage & slurry.

Q: How high can it pump?
A: Up to 50 metres head, depending on piping setup.

Q: Is it reliable for flood emergencies?
A: Absolutely – it’s ideal for basements, compounds & storm drains.

Q: Do I need an electrician to install?
A: Basic setup is plug-and-play, but an electrician is advised for safety.

???? Hashtags

#3HPPump #AicoJapan #SubmersiblePump #SewagePump #MacirePumps #HeavyDutyDrainage #FloodControlPump #WasteWaterSolutions #KenyaPumps

???? Available now at Macire Limited, Barkat Biashara Mall, Kumasi Road – Opp. Simba Coach
???? Call/WhatsApp: +254 718 762 530
???? Visit: www.macire.co.ke