100M Premier 10HP Submersible Mining Pump – QX15-100, 7.5kW

💦 Industrial-Grade Water Power for Mines & Construction by Macire

⚙️ Heavy-Duty, High-Capacity Submersible Solution – Powered by Macire for Extreme Jobs!

The Macire 100M Premier 10HP Submersible Mining Pump – Model QX15-100 (7.5kW) is a high-performance pump specifically built for mining, construction, flood management, and other demanding water-handling applications. Engineered with a robust 10-horsepower motor, this 100-meter lift-capable beast is ready to handle muddy, sandy, or high-volume water removal from deep pits, tunnels, shafts, and industrial sites.

Crafted for rugged durability and powered by a 7.5kW high-speed motor, the QX15-100 model delivers efficient water displacement, even under tough field conditions. Built using industrial-grade cast iron and stainless steel components, it’s optimized for longevity, corrosion resistance, and reliability.

✅ Trusted in the toughest terrains – It’s the pump your mining site deserves. Only from Macire 🚜💧⚡

✅ Key Features & Benefits

• 🔧 10HP (7.5kW) Industrial Motor
  ➤ Delivers unmatched torque and continuous-duty reliability.

• ⬆️ Max Lift: 100M
  ➤ Ideal for deep excavation sites, mine shafts, and tunnels.

• 💧 High Flow Rate: 15,000+ Liters/Hour
  ➤ Removes large water volumes fast, minimizing downtime.

• 🏗 Model QX15-100 Design
  ➤ Purpose-built for construction, mining, and dewatering needs.

• ⚙️ Heavy-Duty Cast Iron + SS Build
  ➤ Strong against abrasion, chemicals, and water impurities.

• 🌊 Can Handle Slightly Muddy or Sandy Water
  ➤ Designed for non-potable industrial usage.

• ⚡ Three-Phase Power Input Required
  ➤ Designed for stable, high-load operations.

📊 Technical Specifications

🏞️ Application Areas

• 🛠 Mining dewatering – Pits, shafts, tunnels

• 🌉 Bridge & road construction sites

• 🏗 Building foundation drainage

• 🌊 Flood-prone regions & emergency water removal

• 🧱 Quarries & sand harvesting zones

• 🚧 Industrial wastewater pumping

🛠️ Installation & Operation Tips (Macire Guide)

1. 📍 Position vertically in a clean pit or borehole with enough submersion.

2. ⚡ Connect to a reliable 3-phase power source (use stabilizer/relay).

3. 🔌 Ensure proper earthing to avoid damage.

4. 🧰 Use heavy-duty cabling with appropriate sizing.

5. 🔄 Install with a check valve and secure outlet piping to reduce vibration.

🔧 Maintenance Tips

• ✅ Inspect impeller regularly for silt or debris.

• ✅ Monitor voltage stability – use stabilizer if in fluctuating regions.

• ✅ Lubricate or service motor bearings annually (if applicable).

• ✅ Don’t run dry – always ensure submersion level is adequate.

• ✅ Use surge protection to prevent motor burnout.

⚠️ Do’s & Don’ts

✅ DO:

• Use a 3-phase breaker and overload relay.

• Install with a lifting hook or hoist ring.

• Regularly check output and cable joints.

❌ DON’T:

• Operate with damaged or taped wires.

• Use in potable water systems.

• Install horizontally – designed for vertical submersion.

❓ FAQs

Q1: Can it be used in brackish or salty water?
🅰️ Not recommended – it’s optimized for slightly sandy or muddy fresh water.

Q2: Can it operate on single-phase power?
🅰️ No – it requires stable 3-phase 380V power.

Q3: What’s the delivery distance (horizontal)?
🅰️ Up to 300–400 meters depending on pipe diameter and elevation.

Q4: How often should it be serviced?
🅰️ Every 6–12 months for optimal performance under heavy use.

📦 What’s in the Box?

• ✔️ Premier QX15-100 10HP Submersible Pump

• ✔️ Lifting handle/ring & outlet adapter

• ✔️ User Manual & Installation Guide

• ✔️ Warranty Card (12 Months)

• ✔️ Support from Macire’s Technical Team

📍 Available at Macire Limited

📍 Barkat Biashara Mall, Kumasi Road – Opp. Simba Coach
📞 Call/WhatsApp: +254 718 762 530
🌐 Visit: www.macire.co.ke

🏷️ #SEO Hashtags

#10HPMiningPump #PremierSubmersiblePump #MacireHeavyDutyPump #QX15_100Pump #7_5kWPumpKenya #IndustrialWaterPump #MacireMiningSolutions #FloodWaterPump #DeepSiteDewatering #PremierPumpByMacire

100M Premier 10HP Submersible Mining Pump – QX15-100, 7.5kW

⚙️ Heavy-duty mining and construction pump, built for serious water jobs.

• ⚡ 10HP / 7.5kW Motor – High-torque, industrial-grade

• ⬆️ 100M Lift Height – Perfect for deep site drainage

• 💧 15,000+ L/h Flow Rate – Efficient dewatering

• 🧱 Cast Iron + SS Build – Rugged, corrosion-resistant

• 🔋 3-Phase Powered – For stable, high-load performance

• 📦 Includes Pump + 1-Year Warranty – Powered by Macire