0.75kW Kunda Solar Borehole Pump (750W, 90m Head)
KSh30,795.00KSh75,999.00 (-59%)
⚡ Power: 0.75kW / 750W solar borehole pump
🔇 Efficient solar-powered water lifting for off-grid use
🔁 Deep-well pumping with up to 90m head
🏠 Homes | 🏢 Offices | 🏥 Clinics
🛠 Durable submersible design for borehole applications
⭐ Verified & Supported by Macire
You may also like
-
-
-
KSh24,560.00Inquire via WhatsApp
KSh65,780.00
0.75kW Kunda Solar Borehole Pump – 750W, 90m Head, DC Solar Pump
Product Overview
The 0.75kW Kunda Solar Borehole Pump is a 750W DC-powered water pumping solution designed for efficient borehole water lifting in off-grid and grid-limited environments. Built for reliable solar water delivery, it is suitable for homes, farms, livestock points, irrigation setups, and small institutions that need dependable pumping without high running fuel costs. With a maximum head of 90 metres, this pump is ideal for deep water transfer applications where stable pressure and efficient lifting performance are important.
In the Kenyan market, this type of pump helps solve common water access challenges in rural homes, farms, and commercial sites by using solar energy for daily pumping needs. Macire supplies this pump as a verified solution, offering product guidance, sizing advice, and delivery support across Kenya. Macire also helps customers choose the right solar array, controller, and installation accessories for dependable field performance.
⭐ Genuine Product | Verified & Supported by Macire
System Architecture & Configuration
Pump Core System
The unit is a submersible solar borehole pump engineered for deep-well water lifting. It is designed to operate with solar power through a matched controller for stable and efficient pumping.
Power Output & Performance
Rated at 0.75kW (750W), the pump is intended for medium-duty daily water transfer applications with a maximum head of 90m. Actual flow depends on borehole depth, pipe sizing, sunlight conditions, and installation layout.
Construction & Materials
Typically built with corrosion-resistant pump body materials suitable for borehole use, with durable internal hydraulic components designed for continuous solar pumping duty.
Control & Protection
Usually paired with a solar pump controller featuring protections for dry running, overload, over/under-voltage, and motor safety. Macire recommends correct controller matching and cable sizing for best results.
Technical Specifications Table
| Specification | Details |
|---|---|
| Product Type | Solar borehole pump |
| Brand | Kunda |
| Rated Power | 0.75kW |
| Power Rating | 750W |
| Maximum Head | 90m |
| Installation Type | Submersible borehole installation |
| Recommended Power Source | Solar PV system with pump controller |
| Typical Application | Borehole water lifting and transfer |
| Water Source | Boreholes / deep wells |
| Duty Type | Daily water pumping |
| Controller | Required for proper solar pump operation |
| Pipework Compatibility | Depends on borehole depth and required flow |
| Operating Performance | Varies with sunlight, depth, and piping |
| Protection Notes | Typical operating range recommended by Macire |
Key Features
- 0.75kW solar-powered borehole pumping capacity
- Maximum head of 90m for deep water lifting
- Suitable for off-grid water supply applications
- Lower running cost compared to fuel-powered pumping
- Ideal for homes, farms, and livestock water systems
- Designed for use with solar PV pumping systems
- Reliable daily water transfer for rural and commercial use
- Submersible design suited for borehole installation
- Reduced dependence on grid electricity
- Compatible with proper controller-based motor protection
- Efficient solution for remote water access
- Verified and supported by Macire for Kenyan conditions
Applications / Use Cases
- 🏠 Homes – domestic water supply from boreholes
- 🚜 Farms – livestock watering and general farm water transfer
- 🌱 Irrigation – pumping water for small-scale irrigation systems
- 🏥 Clinics – dependable water supply in off-grid locations
- 🏢 Offices / Institutions – water transfer where stable utility supply is limited
- 🏭 Light commercial use – workshops, rental units, and small facilities needing borehole water access
Installation & Engineering Notes
- Install only in a properly surveyed and cleaned borehole.
- Confirm static water level, dynamic water level, and total pumping depth before installation.
- Use the correct solar pump controller matched to the pump rating.
- Ensure solar panel sizing is adequate for stable daytime pumping.
- Use suitable drop cable, safety rope, and delivery pipe.
- Protect the system with proper isolators and surge protection where necessary.
- Macire can guide on matching the pump with solar modules, controller, cable size, and installation accessories.
Care, Maintenance & Operations
- Regularly inspect cable joints and controller connections.
- Check discharge pipework for leaks or pressure loss.
- Avoid prolonged dry running.
- Clean or inspect inlet sections where water quality may affect flow.
- Monitor daily output to detect performance drops early.
- Service the pump system if flow reduces abnormally.
- Keep the controller area dry, shaded, and protected.
- Use genuine compatible spares and support available through Macire.
Do’s & Don’ts
✅ Do’s
- Size the pump according to borehole depth and required daily water output
- Use the recommended solar controller and protection devices
- Install with proper submersible cable and pipe fittings
- Monitor water yield and sunlight conditions
- Follow correct installation depth recommendations
- Use qualified technicians for installation
- Consult Macire for system sizing and matching
❌ Don’ts
- Do not run the pump without adequate water in the borehole
- Do not connect directly without the proper controller
- Do not undersize solar panels for the pump load
- Do not use poor-quality cables or joints
- Do not install the pump in a dirty or blocked borehole
- Do not ignore sudden drops in water output
- Do not operate outside recommended installation conditions
Compatibility Section
Compatible with:
- Solar PV panels sized for 750W pump operation
- Solar pump controllers
- Borehole delivery pipes
- Submersible pump cables
- Water storage tanks
- Float switches and tank level controls
- Protection accessories and isolators
- Macire-supplied solar pumping accessories and installation support items
Performance / Runtime Table
| Pumping Head | Expected Performance Trend |
|---|---|
| 20m | Higher flow output |
| 40m | Moderate to high flow |
| 60m | Moderate flow |
| 80m | Reduced flow |
| 90m | Lower flow at maximum head |
Performance depends on installation, borehole yield, solar input, and load sizing as guided by Macire.
Mini FAQ
1. Is 0.75kW enough for my borehole?
It depends on your borehole depth, daily water demand, and required delivery height. Macire can help size it correctly.
2. Can this pump work fully on solar?
Yes, when matched with the right solar panels and pump controller.
3. Is installation support available?
Yes. Macire can advise on installation requirements, accessories, and system matching.
4. Will the flow remain the same at 90m head?
No. Flow generally reduces as pumping head increases.
5. Do you deliver across Kenya?
Yes. Macire supports nationwide supply and delivery.
Why Buy From Macire
Macire supplies genuine solar water pumping products for the Kenyan market.
Every unit is verified before dispatch for better customer confidence.
Macire helps customers match pump size to borehole depth and water demand.
We support complete system planning including pump, controller, and solar panels.
Nationwide delivery is available across Kenya.
Technical guidance is available before purchase and during setup.
We also help with compatible accessories and installation requirements.
Macire understands real local use cases in farms, homes, and institutions.
After-sales support and product guidance remain part of the value offered.
Macire is a trusted Kenyan supplier focused on dependable water and solar solutions.

















Reviews
There are no reviews yet.