AW40 Aico Japan Steel Bar Bender – Heavy-Duty Rebar Bending Machine

The AW40 Aico Japan Steel Bar Bender is a professional reinforcement-processing machine designed to bend steel bars quickly, accurately, and consistently. It replaces slow manual bending methods, helping contractors prepare reinforcement steel efficiently while maintaining uniform angles across repeated bends.

Its powerful electric drive rotates the bending plate smoothly, allowing operators to form rebar for foundations, columns, beams, slabs, stirrups, and other reinforced-concrete structures. The adjustable bending system supports different bend angles and reinforcement layouts required on modern construction projects.

Built with a rugged steel frame and heavy-duty working components, the AW40 is suited to demanding construction sites, steel-fixing yards, precast concrete plants, and fabrication workshops where reliable daily output is essential.

⭐ Genuine Aico Japan Product | Verified & Supported by Macire

📊 Technical Specifications

Confirm the maximum bending diameter, motor rating, voltage, rotation speed, and machine weight from the product nameplate before publishing.

🔧 Product Features

✅ Powerful rebar-bending mechanism forms reinforcement steel efficiently with less manual effort.

✅ Adjustable bending angles support different reinforcement shapes and structural requirements.

✅ Rotating bending plate provides smooth, controlled, and repeatable bends.

✅ Interchangeable bending pins accommodate different bar positions and bending configurations.

✅ Consistent bend formation improves accuracy when producing repeated reinforcement components.

✅ Heavy-duty steel construction withstands demanding construction and workshop environments.

✅ Fast operating cycle increases productivity during large reinforcement projects.

✅ Stable floor-standing design helps minimize movement during operation.

✅ Simple operator controls support efficient daily use by trained personnel.

✅ Verified & Supported by Macire

🎯 Areas of Usage

🏗 Building Construction Sites

🧱 Reinforcement Steel Yards

🏭 Precast Concrete Plants

🌉 Bridge and Road Projects

🏢 Commercial Developments

🔩 Steel Fabrication Workshops

🏘 Residential Construction Projects

🚧 Civil Engineering Works

🛠 Operating and Installation Guidance

• Position the machine on a strong, flat, and stable floor.
• Connect it to the correct electrical supply specified on its nameplate.
• Select the appropriate bending pins for the required bar size and angle.
• Ensure the reinforcement bar is correctly positioned before activating the machine.
• Keep hands away from the rotating plate and bending area.
• Operation should only be performed by trained personnel wearing suitable protective equipment.
• Use the machine within the manufacturer’s stated bending capacity.

🧰 Care and Maintenance

• Clean metal scale and debris from the bending plate after use.
• Lubricate gears, shafts, and moving components according to the service schedule.
• Inspect bending pins and rollers regularly for wear or deformation.
• Check electrical cables, switches, and foot controls before operation.
• Tighten loose bolts and fasteners periodically.
• Avoid bending bars beyond the machine’s rated capacity.
• Store or operate the machine under suitable cover to protect electrical components.

❓ Frequently Asked Questions

1. What is the AW40 Steel Bar Bender used for?

It is used to bend reinforcement steel bars into the angles and shapes required for foundations, beams, columns, slabs, stirrups, and other reinforced-concrete structures.

2. Is it different from the AW40 Steel Bar Cutter?

Yes. The steel bar cutter cuts rebar to the required length, while the steel bar bender forms the cut reinforcement into specified angles and shapes.

3. Can it produce repeated bends at the same angle?

Yes. Its adjustable bending mechanism helps operators produce consistent angles across repeated reinforcement pieces.

4. Is it suitable for major construction projects?

Yes. Its heavy-duty construction and motor-driven operation make it suitable for professional construction, infrastructure, precast, and steel-fabrication work.

5. What is the maximum bar diameter it can bend?

The exact capacity depends on the steel grade and manufacturer’s rating. Confirm the maximum bending diameter from the machine nameplate or official product documentation before use.

6. Does Macire provide after-sales support?

Yes. Macire provides nationwide delivery, technical assistance, spare-parts support, and dependable after-sales service.

💎 Why Buy From Macire?

✅ Genuine Aico Japan Equipment

✅ Nationwide Delivery Across Kenya

✅ Professional Technical Support

✅ Spare-Parts Assistance

✅ Dependable After-Sales Service

✅ Competitive Pricing

✅ Construction-Grade Machinery

✅ Verified & Supported by Macire

Macire – Inspired Living. ✨