62m AKCP200-3 Aico Japan Booster Pump – 4HP, 1.5 Inches, 250L/min, Three Phase

The 62m AKCP200-3 Aico Japan Booster Pump is engineered for installations where high water demand, continuous operation and stable pressure are critical. Powered by a 4HP three-phase electric motor, this heavy-duty booster pump delivers up to 250 litres per minute while maintaining a maximum pumping head of 62 metres, making it ideal for large-scale water distribution systems.

Its 1.5-inch suction and discharge ports allow greater water throughput than conventional domestic booster pumps, reducing flow restriction in high-capacity plumbing systems. The three-phase motor provides smoother operation, lower starting current per phase, improved efficiency and superior performance during extended daily operation.

Whether supplying water to apartment blocks, hotels, irrigation systems, commercial buildings, institutions or manufacturing facilities, the AKCP200-3 is built to provide reliable pressure, rapid tank filling and consistent water delivery under demanding operating conditions.

Supplied and verified by Macire, this pump is selected for Kenyan commercial and industrial environments where reliability, durability and long service life are essential. Macire also provides nationwide delivery, technical guidance and dependable after-sales support.

⭐ Genuine Product | Verified & Supported by Macire

System Architecture & Configuration

Motor System

• Heavy-duty 4HP induction motor
• Three-phase electrical configuration
• Air-cooled motor
• Continuous-duty operation
• High-efficiency power consumption
• Low vibration and smooth running
• Industrial-grade performance

Hydraulic System

• Maximum pumping head of 62 metres
• Maximum flow rate of 250L/min
• High-flow 1.5-inch suction connection
• High-flow 1.5-inch discharge connection
• Centrifugal pumping mechanism
• Stable pressure delivery
• High-volume water transfer capability

Construction

• Heavy-duty cast pump housing
• Durable motor casing
• Corrosion-resistant finish
• Reinforced mounting base
• Industrial-grade shaft assembly
• Robust inlet and outlet ports

Safety & Operation

• Enclosed rotating components
• Air-cooled motor ventilation
• Designed for continuous commercial operation
• Suitable for clean-water applications
• Compatible with industrial motor protection systems
• Stable fixed-installation configuration

Technical Specifications

Typical operating conditions recommended by Macire.

Key Features

• Heavy-duty 4HP three-phase motor
• High pumping head of 62 metres
• High-flow capacity up to 250L/min
• Large 1.5-inch suction and discharge ports
• Designed for continuous operation
• Stable pressure under heavy demand
• Energy-efficient three-phase motor
• Heavy-duty centrifugal pumping system
• Ideal for large commercial buildings
• Rapid elevated tank filling
• Suitable for irrigation and industrial water supply
• Durable corrosion-resistant construction
• Reliable long-term performance
• Verified and supported by Macire

Applications

🏨 Hotels and resorts

🏢 Apartment blocks

🏭 Industrial facilities

🏫 Schools and universities

🏥 Hospitals

🏛 Government institutions

🌾 Large-scale irrigation systems

🌿 Agricultural water distribution

💧 Elevated storage tank filling

🚰 Commercial water boosting

🏘 Housing estates

🐄 Livestock watering systems

🏗 Construction projects

🚿 Multiple high-demand water outlets

Installation & Engineering Notes

• Install on a solid, vibration-free concrete base.
• Use full-size 1.5-inch suction and delivery pipes.
• Keep suction piping as short and straight as possible.
• Ensure all suction joints are completely airtight.
• Install a foot valve and suction strainer where applicable.
• Prime the pump before the first operation.
• Never operate the pump dry.
• Connect only to the recommended three-phase electrical supply.
• Install a motor starter with overload protection.
• Use appropriate circuit breakers and isolators.
• Confirm correct motor rotation before commissioning.
• Electrical installation should only be performed by a qualified technician.
• Protect the motor from flooding and direct rain.
• Macire provides installation guidance and technical support.

Care, Maintenance & Operations

• Inspect the pump regularly for leaks.
• Clean the suction strainer periodically.
• Check electrical terminals and motor connections.
• Monitor bearing condition during servicing.
• Keep cooling vents free from dust.
• Avoid pumping abrasive or contaminated water.
• Check pipe joints for pressure losses.
• Service the pump according to operating hours.
• Replace worn seals promptly.
• Use only genuine replacement parts.
• Technical support is available through Macire.

Do’s & Don’ts

✅ Do’s

• Prime before starting.
• Install proper motor protection.
• Use full-size pipework.
• Maintain adequate ventilation.
• Inspect electrical connections regularly.
• Use clean water only.
• Follow scheduled maintenance.
• Use genuine replacement parts.
• Consult Macire for installation advice.

❌ Don’ts

• Do not operate the pump dry.
• Do not reduce pipe diameter unnecessarily.
• Do not reverse motor rotation.
• Do not pump muddy or abrasive water.
• Do not expose the motor to flooding.
• Do not bypass motor protection devices.
• Do not overload the electrical circuit.
• Do not ignore abnormal vibration or noise.

Compatibility

Compatible with:

• 1.5-inch commercial pipework
• Elevated storage tanks
• Automatic pump controllers
• Pressure tanks
• Irrigation systems
• Fire water storage systems
• Commercial plumbing networks
• Industrial water distribution systems
• Motor starters
• Overload protection devices
• Genuine Macire replacement parts

Performance Table

Performance depends on installation design, pipe sizing, elevation and routine maintenance as recommended by Macire.

Frequently Asked Questions

1. Why choose the three-phase AKCP200-3 over the single-phase version?

The three-phase motor offers smoother operation, better efficiency, lower operating stress and is better suited for continuous commercial and industrial use.

2. Can it supply several buildings simultaneously?

Yes. With a flow rate of up to 250L/min, it is suitable for supplying multiple outlets and larger plumbing systems.

3. What is the maximum pumping head?

The AKCP200-3 can deliver water up to a maximum head of 62 metres.

4. What pipe size does it use?

The pump is fitted with high-flow 1.5-inch suction and discharge ports.

5. Can it be used for irrigation?

Yes. It is ideal for sprinkler systems, agricultural irrigation and farm water distribution.

6. Is it suitable for continuous operation?

Yes. The three-phase motor is designed for demanding, long-duration commercial operation.

7. Can Macire deliver nationwide?

Yes. Macire delivers genuine Aico Japan pumps throughout Kenya.

8. Are spare parts available?

Yes. Genuine spare parts and technical support are available through Macire.

9. Does Macire provide after-sales support?

Yes. Macire provides technical guidance, product verification and dependable after-sales support.

Why Buy from Macire

• Genuine Aico Japan products
• Product verification before dispatch
• Nationwide delivery across Kenya
• Technical product guidance
• Genuine spare parts support
• Reliable after-sales service
• Experienced technical team
• Trusted Kenyan water equipment supplier
• Competitive pricing
• Long-term customer support

Macire – Inspired Living. ✨