600W Doyin DYS-60 DC Solar Pump Controller – Solar Input, Automatic Control, Pump Protection

Product Overview

The 600W Doyin DYS-60 DC Solar Pump Controller is designed for managing compatible 600W DC solar water pumps, providing controlled operation directly from a correctly sized solar PV system. Unlike AC/DC hybrid models, the DYS-60 is specifically intended for DC solar pumping applications, making it a practical solution where daytime water pumping from solar energy is the primary requirement.

Its 600W rating makes it particularly suitable for small-to-medium borehole, farm, livestock, irrigation and water-storage applications. When integrated with compatible water-level sensing equipment, the controller can support automatic pump operation and help protect the pumping system.

Macire supplies the Doyin DYS-60 with guidance on correct pump, controller and solar-panel matching for reliable operation in Kenyan conditions.

⭐ Genuine Product | Verified & Supported by Macire

System Architecture & Configuration

600W DC Pump Control

Designed to operate a correctly matched 600W DC solar water pump.

Direct Solar Operation

Uses energy from a compatible solar PV array to operate the connected DC pump without requiring normal grid electricity during solar operation.

Automatic Water Control

Can support automatic pumping when integrated with compatible tank and borehole water-level sensors.

Pump Management

Provides centralised control between the solar array and connected pump for more reliable solar pumping operation.

Technical Specifications

Exact PV voltage range, current limits and protection functions should be confirmed from the controller nameplate or Doyin technical documentation.

Key Features

• 600W DC solar pump control capacity
• Purpose-built for solar water pumping
• Designed for compatible 600W DC pumps
• Uses available solar PV energy for pumping
• Supports automatic water-level control configurations
• Suitable for off-grid water pumping
• Practical for boreholes and wells
• Suitable for agricultural water supply
• Supports tank-filling applications
• Reduces reliance on grid electricity for daytime pumping
• Compact control solution for smaller solar pumping systems
• Technical system-matching support available from Macire

Applications / Use Cases

• 🚜 Farms – solar-powered agricultural water supply
• 💧 Boreholes – pumping groundwater using solar energy
• 🌱 Irrigation – small-scale crop and garden irrigation
• 🐄 Livestock – pumping water to drinking tanks and troughs
• 🏠 Homes – borehole-to-storage-tank pumping
• 🌍 Off-Grid Locations – water pumping where grid electricity is unavailable

Installation & Engineering Notes

Install the DYS-60 in a dry, ventilated and protected location. The connected DC pump must be correctly matched to the controller’s 600W rating and electrical output characteristics.

The solar array should be sized according to the required operating voltage and power of the controller and pump. Correct cable sizing, polarity, earthing and electrical protection should be observed.

For automatic tank filling or dry-run management, compatible level sensors should be installed where supported.

Macire can provide technical guidance when matching the controller, DC pump and solar panels.

Care, Maintenance & Operations

• Keep the controller protected from rain and direct water exposure.
• Maintain adequate ventilation around the unit.
• Inspect PV and pump cable connections regularly.
• Keep electrical terminals securely tightened.
• Check water-level sensors periodically.
• Maintain correct solar-panel orientation and cleanliness.
• Do not exceed the controller’s specified electrical limits.
• Contact Macire for technical support and compatible accessories.

Do’s & Don’ts

Do’s

• Use a correctly matched 600W DC pump.
• Confirm PV voltage before connecting solar panels.
• Observe correct DC polarity.
• Use appropriately sized solar cables.
• Install suitable electrical protection.
• Keep the controller dry and ventilated.

Don’ts

• Do not connect an oversized pump.
• Do not exceed the controller’s PV input limits.
• Do not reverse DC polarity.
• Do not connect an AC supply unless explicitly permitted by the manufacturer.
• Do not operate with loose electrical terminals.
• Do not install the controller where it can be directly exposed to water.

Compatibility

The Doyin DYS-60 can be integrated with appropriately matched:

• 600W DC solar water pumps
• Doyin DC borehole pumps
• Solar PV panels
• Borehole water-level sensors
• Tank level sensors
• Float switches
• DC protection devices
• Water storage tanks
• Small irrigation systems

Final pump and PV compatibility should be verified using the equipment nameplate specifications.

Performance / Operating Mode

Actual water flow and pumping head depend on the connected pump, solar-array output, borehole depth, pipework and installation conditions.

Mini FAQ

1. What pump is suitable for the DYS-60?
It is designed for a correctly matched 600W DC solar pump. Exact voltage and current compatibility must also be checked.

2. Does the DYS-60 require grid electricity?
It is a DC solar pump controller intended primarily for solar-powered pumping.

3. Can it automatically fill a water tank?
Automatic operation can be achieved where compatible water-level sensors and control functions are correctly configured.

4. Is it suitable for boreholes?
Yes. It is suitable for compatible DC solar borehole pumping systems within its electrical rating.

5. Does Macire provide nationwide delivery?
Yes. Delivery can be arranged across Kenya, subject to destination and delivery terms.

Why Buy from Macire

Macire supplies genuine Doyin solar pumping equipment.
Products are verified before dispatch.
Technical guidance is available for controller and pump matching.
Support is available for correct solar-panel sizing.
Compatible solar pumping accessories can be supplied.
Installation guidance is available.
After-sales technical support is provided.
Macire supports residential, agricultural and commercial water projects.
Kenya-wide delivery can be arranged.