6.2kW Yachu 48V Hybrid Solar Inverter – 120A MPPT, Pure Sine Wave, Parallel Ready
KSh52,800.00KSh100,000.00 (-47%)
-
⚡ Power: 6.2kW | 48V System
???? Pure Sine Wave Output
???? Built-in 120A MPPT Hybrid Control
???? Homes | ???? Offices | ???? Clinics
???? Parallel-Ready & Durable Design
⭐ Verified & Supported by Macire
You may also like
-
KSh24,995.00Inquire via WhatsApp
KSh49,000.00 -
KSh134,860.80Inquire via WhatsApp
KSh307,556.00 -
KSh195,000.00Inquire via WhatsApp
KSh487,555.00
The Yachu 48V 6.2kW Hybrid Solar Inverter is a high-capacity energy management solution designed for residential and light commercial solar systems. With a robust 6.2kW output rating and 48V battery architecture, it efficiently integrates solar panels, battery storage, and utility power into a seamless hybrid system.
Equipped with an advanced 120A MPPT charge controller, this inverter maximizes solar energy harvest and ensures stable pure sine wave output suitable for refrigerators, pumps, office equipment, and other sensitive electronics.
It is ideal for Kenyan homes, clinics, offices, and retail shops requiring dependable backup and reduced grid dependency. Macire verifies each unit before dispatch, provides system sizing guidance, and supports nationwide delivery and installation planning.
⭐ Genuine Product | Verified & Supported by Macire
SYSTEM ARCHITECTURE & CONFIGURATION
Core Power System
-
Rated Output Power: 6.2kW
-
48V DC battery system
-
Pure sine wave AC output
Solar Charging System
-
Integrated 120A MPPT controller
-
High solar conversion efficiency (up to 98%)
-
Wide PV input voltage range
Hybrid Integration
-
Utility/grid input support
-
Automatic transfer between solar, battery, and grid
-
Programmable energy priority modes
Cooling & Protection
-
Intelligent temperature-controlled fans
-
Overload protection
-
Short circuit protection
-
Over-temperature shutdown
-
Low battery protection
???? TECHNICAL SPECIFICATIONS
| Specification | Details |
|---|---|
| Rated Power | 6.2kW |
| System Voltage | 48V DC |
| Output Waveform | Pure Sine Wave |
| MPPT Charger Rating | 120A |
| PV Input Voltage Range | 60V – 450V DC (typical model range) |
| Max PV Array Power | ~7500W (recommended range by Macire) |
| AC Output Voltage | 230V ±5% |
| Output Frequency | 50Hz |
| Transfer Time | <10ms |
| Peak Efficiency | Up to 98% |
| Parallel Capability | Yes (model dependent) |
| Display | LCD monitoring panel |
| Cooling | Forced air cooling |
Typical operating range recommended by Macire based on Kenyan solar conditions.
???? KEY FEATURES
-
6.2kW continuous output capacity
-
48V high-efficiency battery platform
-
Built-in 120A MPPT solar charger
-
Pure sine wave output for sensitive loads
-
Programmable charging priorities
-
Fast automatic transfer during outages
-
Parallel-ready for system expansion
-
LCD display for real-time monitoring
-
Multi-layer protection systems
-
Verified and tested by Macire before delivery
???? APPLICATIONS / USE CASES
???? Homes – Full house backup including fridge, microwave, lighting
???? Offices – Computers, networking, printers, POS systems
???? Clinics – Medical equipment and refrigeration backup
???? Farms – Water pumps and lighting systems
???? Workshops – Moderate power tools within rated limits
???? Light Commercial Use – Shops, salons, mini-marts
???? INSTALLATION & ENGINEERING NOTES
-
Install in a dry, ventilated indoor location
-
Ensure correct DC cable sizing for 48V systems
-
Use recommended lithium or GEL battery bank
-
Install DC and AC protection breakers
-
Confirm PV string voltage falls within MPPT range
-
Macire provides load analysis and installation guidance
???? CARE, MAINTENANCE & OPERATIONS
-
Keep air vents clean and unobstructed
-
Inspect battery connections regularly
-
Monitor LCD for fault warnings
-
Avoid continuous operation at full load
-
Ensure proper earthing
-
Schedule annual system checks
-
Use surge protection devices
-
Service and support available through Macire
⚠️ DO’S & DON’TS
✅ Do’s
-
Use compatible 48V battery systems
-
Install adequate surge protection
-
Size solar panels correctly
-
Maintain ventilation clearance
-
Follow installation manual
-
Consult Macire for system expansion
-
Perform regular system checks
❌ Don’ts
-
Do not exceed 6.2kW continuous load
-
Do not mix incompatible battery types
-
Do not install outdoors without protection
-
Do not overload AC output
-
Do not bypass safety breakers
-
Do not exceed MPPT voltage limits
-
Do not ignore system alarms
???? COMPATIBILITY
-
48V Lithium (LiFePO₄) battery banks
-
48V GEL/AGM batteries
-
Solar panel arrays within MPPT limits
-
AC distribution boards
-
Changeover switches
-
Surge protection devices
-
Macire-supplied lithium battery systems
???? PERFORMANCE / RUNTIME TABLE
| Load | Estimated Runtime (200Ah 48V Lithium) |
|---|---|
| 500W | 18–20 hours |
| 1000W | 9–10 hours |
| 2000W | 4–5 hours |
| 4000W | 2–2.5 hours |
| 6000W | ~1.5 hours |
Performance depends on battery capacity, installation quality, and load sizing as guided by Macire.
❓ MINI FAQ
1. Can this run a full home?
Yes, depending on load. Macire provides load assessment before purchase.
2. Is it suitable for lithium batteries?
Yes, compatible with most 48V lithium systems.
3. Does Macire provide installation support?
Yes, installation guidance and nationwide delivery are available.
4. Can it be expanded?
Parallel capability is available depending on model version.
5. Is it efficient?
Yes, it uses high-efficiency MPPT technology for optimal solar harvest.
???? WHY BUY FROM MACIRE
-
Genuine Yachu products only
-
Every inverter verified before dispatch
-
Proper system sizing and load calculation support
-
Kenya-wide delivery
-
Installation guidance and ATS integration support
-
Compatible lithium batteries available
-
After-sales technical assistance
-
Access to spares and system accessories
-
Trusted Kenyan supplier with proven track record
Macire – Inspired Living. ✨
















Reviews
There are no reviews yet.