5.12kWh Yachu Lithium Battery – 51.2V LiFePO₄, 100Ah, Wall-Mounted
KSh99,995.00KSh210,000.00 (-52%)
⚡ Power: 5.12kWh | 51.2V Lithium Storage
???? High-efficiency LiFePO₄ chemistry
???? Intelligent BMS protection system
???? Homes | ???? Offices | ???? Clinics
???? Durable wall-mounted enclosure
⭐ Verified & Supported by Macire
You may also like
-
KSh359,700.00Inquire via WhatsApp
KSh765,500.00 -
KSh60,495.00Inquire via WhatsApp
KSh89,995.00 -
KSh193,995.00Inquire via WhatsApp
KSh300,000.00 -
KSh52,500.00Inquire via WhatsApp
KSh123,450.00
The 5.12kWh Yachu 51.2V LiFePO₄ Lithium Battery is a high-efficiency energy storage solution designed for hybrid and off-grid solar systems. With a nominal voltage of 51.2V and 100Ah capacity, it delivers approximately 5.12kWh of usable energy, making it suitable for residential and light commercial backup applications in Kenya.
Built using Lithium Iron Phosphate (LiFePO₄) technology, this battery offers enhanced safety, long cycle life, and consistent discharge performance compared to conventional lead-acid batteries. It supports deep discharge operation while maintaining voltage stability for inverter-based systems.
Macire supplies and verifies each Yachu battery to ensure compatibility with approved 48V-class hybrid inverters. Macire also provides technical sizing guidance, delivery support, and installation advisory across Kenya.
⭐ Genuine Product | Verified & Supported by Macire
4️⃣ SYSTEM ARCHITECTURE & CONFIGURATION
Core Cell Technology
-
Lithium Iron Phosphate (LiFePO₄) prismatic cells
-
16-cell configuration (51.2V nominal system)
-
High thermal stability chemistry
Integrated Battery Management System (BMS)
-
Overcharge protection
-
Over-discharge protection
-
Short circuit and overcurrent protection
-
Temperature monitoring and balancing
Mechanical Construction
-
Wall-mounted or rack-compatible enclosure
-
Durable steel casing
-
Front-access communication and power terminals
5️⃣ ???? TECHNICAL SPECIFICATIONS
| Specification | Details |
|---|---|
| Energy Capacity | 5.12kWh |
| Nominal Voltage | 51.2V |
| Nominal Capacity | 100Ah |
| Battery Chemistry | LiFePO₄ (Lithium Iron Phosphate) |
| Cycle Life | 4000–6000 cycles @ 80% DoD |
| Depth of Discharge | Up to 90–95% |
| Charge Voltage | ~56–58V (Typical operating range recommended by Macire) |
| Communication | RS485 / CAN (model dependent) |
| Expansion | Parallel connection supported (model dependent) |
| Mounting Type | Wall / Rack |
| Operating Temperature | 0°C to 50°C |
| Protection Rating | Indoor installation recommended |
6️⃣ ???? KEY FEATURES
-
5.12kWh usable storage capacity
-
51.2V nominal voltage for 48V-class systems
-
Long lifespan LiFePO₄ chemistry
-
High depth of discharge capability
-
Intelligent built-in BMS
-
Stable discharge voltage profile
-
Parallel expansion capability
-
Compact wall-mounted design
-
Low maintenance requirements
-
Verified compatibility checks by Macire
-
Suitable for Kenyan hybrid solar systems
7️⃣ ???? APPLICATIONS / USE CASES
???? Homes – Solar backup and night-time power
???? Offices – Computers, lighting, routers
???? Clinics – Essential medical devices backup
???? Farms – Solar water systems and lighting
???? Workshops – Small equipment support
???? Light commercial – Shops and small enterprises
8️⃣ ???? INSTALLATION & ENGINEERING NOTES
-
Install indoors in a dry, ventilated area
-
Use correct DC isolators and protection breakers
-
Configure inverter to lithium charging profile
-
Avoid direct sunlight or moisture exposure
-
Ensure proper cable sizing to handle current draw
-
Macire provides system compatibility guidance before installation
9️⃣ ???? CARE, MAINTENANCE & OPERATIONS
-
Avoid continuous full discharge below recommended levels
-
Keep ventilation openings unobstructed
-
Periodically inspect terminals and DC connections
-
Ensure firmware communication settings match inverter
-
Avoid physical impact or vibration
-
Follow recommended charge settings
-
Service and advisory support available through Macire
???? ⚠️ DO’S & DON’TS
✅ Do’s
-
Use with compatible 48V hybrid inverters
-
Set correct lithium charge parameters
-
Install proper DC protection
-
Mount securely on stable surface
-
Consult Macire for load sizing
-
Allow airflow around battery
❌ Don’ts
-
Do not mix with lead-acid batteries in the same bank
-
Do not expose to rain or high humidity
-
Do not bypass the BMS
-
Do not use incompatible chargers
-
Do not exceed inverter rated limits
-
Do not install outdoors without protection
1️⃣1️⃣ ???? COMPATIBILITY
-
48V Hybrid Solar Inverters
-
Off-grid inverter systems
-
MPPT charge controllers
-
Solar panel arrays
-
AC distribution panels
-
Macire-supplied lithium-ready inverter systems
1️⃣2️⃣ ???? PERFORMANCE / RUNTIME TABLE
| Load | Estimated Backup Time |
|---|---|
| 500W | 8–9 hours |
| 1kW | 4–5 hours |
| 2kW | 2–2.5 hours |
| 3kW | 1.5 hours |
| 5kW | ~1 hour |
Performance depends on installation, inverter efficiency, and load sizing as guided by Macire.
1️⃣3️⃣ ❓ MINI FAQ
1. Is 5.12kWh enough for a typical Kenyan home?
It can support essential appliances; full-house systems require load assessment by Macire.
2. Can I connect multiple batteries together?
Yes, parallel expansion is supported depending on the model configuration.
3. Does Macire offer installation assistance?
Yes, Macire provides compatibility verification and technical advisory.
4. How long does the battery last?
Up to 4000–6000 cycles depending on depth of discharge and usage.
5. Do you deliver across Kenya?
Yes, Macire offers nationwide delivery and logistics support.
1️⃣4️⃣ ???? WHY BUY FROM MACIRE
Macire supplies genuine Yachu lithium batteries only.
Each unit is verified before dispatch.
We assist with inverter compatibility and load sizing.
Technical guidance provided before and after purchase.
Kenya-wide delivery coverage.
Support for hybrid and off-grid installations.
After-sales advisory available.
Professional system integration guidance.
Trusted Kenyan supplier with a proven track record.
Macire – Inspired Living. ✨


















Reviews
There are no reviews yet.