5.12kWh SVC Phoenix Series LiFePO₄ Lithium Battery – 48V, 100Ah, Smart BMS
KSh98,995.00KSh150,000.00 (-34%)
-
⚡ Power: 5.12kWh lithium storage
🔇 High-efficiency, low-loss operation
🔁 Smart BMS with parallel capability
🏠 Homes | 🏢 Offices | 🏥 Clinics
🛠 Safe LiFePO₄ battery construction
⭐ Verified & Supported by Macire
You may also like
-
KSh117,995.00Inquire via WhatsApp
KSh287,556.00
The 5.12kWh SVC Phoenix Series LiFePO₄ Lithium Battery is a high-performance 48V energy storage solution designed for modern solar and backup power systems. With a 100Ah capacity and advanced lithium iron phosphate chemistry, it delivers stable power, deep discharge capability, and long service life.
This battery features an intelligent Battery Management System (BMS) that actively protects against overcharge, over-discharge, short circuit, and temperature extremes—ensuring safety and consistent performance in Kenyan operating conditions. Its compact, rack-mount-friendly design makes it suitable for both residential and commercial installations where space efficiency and reliability matter.
Ideal for homes, offices, clinics, and businesses using hybrid or off-grid inverters, this battery integrates seamlessly with 48V solar systems. Macire verifies each unit, supports correct sizing and configuration, and provides nationwide delivery and after-sales technical support.
⭐ Genuine Product | Verified & Supported by Macire
🧩 SYSTEM ARCHITECTURE & CONFIGURATION
Cell Chemistry
Lithium Iron Phosphate (LiFePO₄) for enhanced safety and longevity.
Energy Storage
5.12kWh usable capacity with stable voltage output.
Battery Management System
Integrated smart BMS for protection, balancing, and communication.
Scalability
Supports parallel connection for increased storage capacity, as guided by Macire.
Mechanical Design
Compact enclosure suitable for rack or cabinet installation.
📊 TECHNICAL SPECIFICATIONS
| Parameter | Specification |
|---|---|
| Nominal Energy | 5.12kWh |
| Nominal Voltage | 51.2V (48V system) |
| Capacity | 100Ah |
| Battery Chemistry | LiFePO₄ |
| Depth of Discharge | Up to 90% |
| Cycle Life | ≥ 6000 cycles |
| BMS | Integrated Smart BMS |
| Charge Voltage | ~56–58V |
| Discharge Cut-off | ~44–46V |
| Parallel Expansion | Supported |
| Cooling | Natural / Passive |
| Installation | Rack / Wall / Cabinet |
| Operating Temperature | 0°C to +50°C |
Typical operating parameters recommended by Macire.
🔧 KEY FEATURES
-
5.12kWh reliable energy storage capacity
-
Safe and stable LiFePO₄ chemistry
-
Integrated smart BMS protection system
-
Long cycle life for reduced replacement cost
-
High compatibility with 48V hybrid inverters
-
Parallel-ready for scalable storage systems
-
Compact, space-saving design
-
Low maintenance operation
-
Stable performance in Kenyan climates
-
Verified and supported by Macire
🎯 APPLICATIONS / USE CASES
🏠 Homes – Backup power and solar self-consumption
🏢 Offices – Reliable energy storage for daily operations
🏥 Clinics – Stable power for sensitive equipment
🚜 Farms – Solar storage for pumps and farm loads
🔧 Workshops – Support for tools and lighting
🏭 Light Commercial – Shops, lodges, and institutions
🛠 INSTALLATION & ENGINEERING NOTES
-
Install in a dry, well-ventilated indoor environment
-
Use compatible 48V hybrid or off-grid inverters
-
Follow correct polarity and cable sizing
-
Parallel configurations should follow Macire technical guidance
🧰 CARE, MAINTENANCE & OPERATIONS
-
Keep battery terminals clean and secure
-
Avoid exposure to moisture and direct heat
-
Operate within recommended voltage limits
-
Do not fully discharge repeatedly beyond limits
-
Periodically check system settings
-
Service support and spares available via Macire
⚠️ DO’S & DON’TS
✅ Do’s
-
Use compatible lithium battery inverter settings
-
Install with proper DC protection
-
Allow adequate airflow around the battery
-
Expand capacity using identical battery models
-
Follow Macire-recommended installation practices
❌ Don’ts
-
Do not mix with different battery chemistries
-
Do not short-circuit terminals
-
Do not install outdoors without enclosure
-
Do not exceed recommended charge voltage
-
Do not attempt internal repairs
🔌 COMPATIBILITY
-
48V hybrid and off-grid solar inverters
-
Solar PV systems with MPPT controllers
-
Generator-backed hybrid systems
-
Battery cabinets and racks
-
Macire-supplied DC breakers and accessories
📈 PERFORMANCE / RUNTIME GUIDANCE
| Load Level | Approximate Backup Time |
|---|---|
| 500W Load | ~9–10 hours |
| 1kW Load | ~4–5 hours |
| 2kW Load | ~2–2.5 hours |
| 4kW Load | ~1–1.2 hours |
Performance depends on system design and load sizing as guided by Macire.
❓ MINI FAQ
Is this battery suitable for home solar systems?
Yes, it is ideal for residential and small commercial setups.
Can multiple units be connected together?
Yes, parallel expansion is supported.
Does it work with hybrid inverters?
Yes, fully compatible with most 48V hybrid inverters.
Does Macire offer installation support?
Yes, including system sizing and technical guidance.
Is delivery available across Kenya?
Yes, Macire delivers nationwide.
💎 WHY BUY FROM MACIRE
-
Genuine SVC Phoenix lithium batteries only
-
Verification before dispatch
-
Expert system sizing and configuration support
-
Kenya-wide delivery network
-
Installation and commissioning guidance
-
After-sales service and spare parts availability
-
Trusted supplier for solar and energy systems
-
Proven track record in Kenyan installations
⚡ Power: 5.12kWh lithium storage
🔇 High-efficiency, low-loss operation
🔁 Smart BMS with parallel capability
🏠 Homes | 🏢 Offices | 🏥 Clinics
🛠 Safe LiFePO₄ battery construction
⭐ Verified & Supported by Macire
Macire – Inspired Living. ✨













Reviews
There are no reviews yet.