4″ Steel Wire Braided PVC Hose Suction Pipe – 12 Metres, Reinforced Industrial Grade

The 4″ Steel Wire Braided PVC Hose Suction Pipe (12 metres) is a heavy-duty industrial suction hose designed for high-volume water transfer applications. Constructed from durable clear PVC and reinforced with steel wire braiding, it maintains structural stability under strong suction pressure while remaining flexible for field installation.

Its large 4-inch diameter allows high flow rates, making it ideal for diesel water pumps, irrigation systems, construction dewatering, and flood control applications across Kenya. The reinforced spiral prevents collapse during vacuum operation and enhances resistance to crushing and mechanical stress.

This hose is suited for demanding environments where durability and consistent suction performance are required.

Macire verifies build quality and provides compatibility guidance for pump sizing and installation requirements across agricultural and commercial projects.

⭐ Genuine Product | Verified & Supported by Macire

4️⃣ SYSTEM ARCHITECTURE & CONFIGURATION

Hose Construction

• Transparent heavy-duty PVC body

• Embedded steel wire spiral reinforcement

• Smooth internal bore for efficient flow

Structural Strength

• Designed for vacuum suction use

• Crush-resistant outer structure

• Maintains circular profile under load

Connection Interface

• Compatible with 4-inch pump inlets

• Suitable for heavy-duty hose clamps

• Works with diesel and petrol high-flow pumps

5️⃣ ???? TECHNICAL SPECIFICATIONS

6️⃣ ???? KEY FEATURES

• Large 4-inch diameter for high flow

• 12-metre continuous length

• Steel wire reinforced structure

• Resistant to collapse under suction

• Clear PVC body for flow monitoring

• Heavy-duty industrial construction

• Suitable for large diesel pumps

• Flexible for field routing

• Durable for outdoor environments

• Compatibility guidance from Macire

7️⃣ ???? APPLICATIONS / USE CASES

???? Large-Scale Irrigation – High-volume farm water transfer
???? Construction Sites – Dewatering and trench drainage
???? Flood Control – Emergency water evacuation
???? Industrial Facilities – Tank and reservoir transfer
???? River or Dam Pumping Systems – Surface water suction

8️⃣ ???? INSTALLATION & ENGINEERING NOTES

• Use reinforced hose clamps for secure sealing

• Keep hose as straight as possible for maximum flow

• Install a 4″ foot valve where required

• Avoid sharp bends or excessive twisting

• Suitable for above-ground suction use

• Macire provides pump compatibility guidance

9️⃣ ???? CARE, MAINTENANCE & OPERATIONS

• Inspect wire reinforcement regularly

• Flush after use with muddy water

• Avoid dragging over sharp debris

• Store away from prolonged direct sunlight

• Check fittings before operation

• Replace if flattening or cracking appears

• Maintain clean internal bore

• Fittings and accessories available through Macire

???? ⚠️ DO’S & DON’TS

✅ Do’s

• Do secure tightly with heavy-duty clamps

• Do use correct 4-inch fittings

• Do inspect before every operation

• Do maintain straight alignment where possible

• Do use with compatible high-flow pumps

• Do consult Macire for pump sizing

❌ Don’ts

• Do not use for high-pressure discharge

• Do not sharply bend the hose

• Do not expose to open flame

• Do not operate without proper sealing

• Do not exceed recommended suction limits

• Do not leave exposed to heavy mechanical impact

1️⃣1️⃣ ???? COMPATIBILITY SECTION

Compatible with:

• 4-inch diesel water pumps

• 4-inch petrol water pumps

• High-capacity centrifugal pumps

• Foot valves and strainers

• Heavy-duty hose clamps

• Macire-supplied pump systems

1️⃣2️⃣ ???? PERFORMANCE TABLE

Performance depends on pump horsepower, suction height, and installation conditions as guided by Macire.

1️⃣3️⃣ ❓ MINI FAQ

1. Is 4-inch suitable for large irrigation projects?
Yes. It supports high flow rates for large-scale farming.

2. Can it handle muddy water?
Yes, for light to moderate slurry and surface water.

3. Does Macire supply compatible pumps?
Yes. Macire provides matched pump systems and fittings.

4. Is it designed for discharge use?
It is primarily designed for suction applications.

5. Is delivery available countrywide?
Yes. Macire delivers across Kenya.

1️⃣4️⃣ ???? WHY BUY FROM MACIRE

• Genuine heavy-duty industrial hoses

• Quality verified before dispatch

• Pump compatibility guidance

• Kenya-wide delivery

• Access to clamps and fittings

• Technical support for installation

• Support for agricultural and construction projects

• Reliable Kenyan supplier

• Professional quotations and documentation

• After-sales assistance when required

Macire – Inspired Living. ✨