2.56kWh Felicity FLA24100PG2 24V 100Ah Grade A Battery

The 2.56kWh Felicity FLA24100PG2 is a 24V 100Ah Grade A battery built specifically for compatible 24V solar and backup systems. Its native 24V configuration delivers 2.56kWh nominal storage from one battery, avoiding the need to combine two separate 12V batteries where a single 24V unit is preferred.

This exact model stands out with 95% DOD and ≥6000 cycles at 25°C, making it particularly suited to systems where the battery will undergo regular solar charging and backup discharge cycles.

For power matching, the FLA24100PG2 has a recommended discharge power below 2,500W and a recommended charge current below 100A. These limits are important when selecting the inverter, charger and loads for the battery.

The battery is specifically non-wall-mounted, making it suitable for secure supported installation in a dedicated battery or solar equipment area.

Technical Specifications

Key Features

• 2.56kWh nominal energy storage
• Native 24V 100Ah configuration
• Grade A battery
• High 95% DOD
• ≥6000 cycles at 25°C
• Recommended charge current <100A
• Recommended discharge power <2,500W
• Single-battery 24V storage solution
• Non-wall-mounted configuration
• Exact FLA24100PG2 model

Native 24V Storage Advantage

The FLA24100PG2 provides:

24V | 100Ah | 2.56kWh

from a single battery.

This is particularly useful for compatible 24V inverter systems, as the required nominal voltage is available directly from one battery rather than being created by connecting two separate 12V batteries in series.

This simplifies the battery-bank configuration for systems where 2.56kWh of nominal storage is sufficient.

2.56kWh Energy Capacity

The battery provides 2.56kWh nominal stored energy, giving it a clearly defined capacity for solar and backup system sizing.

The 2.56kWh figure describes energy storage, not the amount of power that can be supplied at one moment.

Actual backup duration depends on the connected load, usable battery energy, inverter efficiency and system settings.

<2,500W Recommended Discharge Power

A key specification of the FLA24100PG2 is:

Recommended Discharge Power: <2,500W

This is especially relevant when selecting an inverter and determining which loads the battery should support.

For this battery:

🔋 2.56kWh = Nominal stored energy

⚡ <2,500W = Recommended discharge power

The battery should therefore be matched using both its energy capacity and discharge-power recommendation, rather than the 100Ah rating alone.

<100A Recommended Charge Current

Felicity specifies:

Recommended Charge Current: <100A

The charging equipment should be configured so that the battery remains within this recommendation.

This is particularly important when using an inverter or solar charger capable of delivering a higher charging current.

95% DOD

The FLA24100PG2 is specified with a high:

95% Depth of Discharge

This allows the battery to operate across a substantial proportion of its stored capacity under the specified conditions.

The actual discharge settings should still follow Felicity’s recommended operating parameters.

≥6000 Cycles at 25°C

The battery is specified for:

≥6000 cycles @ 25°C

This makes cycle life one of the major strengths of this exact model for regularly cycled solar and backup installations.

Because the rating is specified at 25°C, actual service life can vary depending on operating temperature, charging conditions, discharge behaviour and installation environment.

Grade A Battery

The Grade A specification complements the battery’s defined operating characteristics:

2.56kWh

24V / 100Ah

95% DOD

≥6000 cycles @ 25°C

<2,500W recommended discharge power

This makes the FLA24100PG2 a particularly focused choice for appropriately sized 24V energy-storage systems.

Non-Wall-Mounted Design

The FLA24100PG2 is non-wall-mounted.

It should be securely positioned in an appropriate supported installation location such as a:

🔋 Dedicated Battery Area

🗄️ Suitable Battery Cabinet

⚡ Solar Equipment Area

🏠 Secure Battery Space

Installation orientation and environmental conditions should follow Felicity’s requirements.

Applications / Use Cases

☀️ 24V Solar Systems – native 24V storage for compatible hybrid inverter installations.

🏠 Home Backup – 2.56kWh nominal storage for appropriately calculated household loads.

💻 Home Offices – suitable for selected electronics and backup requirements.

🏪 Small Businesses – practical storage for correctly sized essential business loads.

💡 Essential Loads – suitable for appropriately calculated lighting and electronic equipment.

🔋 24V Battery Upgrades – a single 24V 100Ah unit for compatible existing systems.

FLA24100PG2 System Matching

For this exact battery, verify:

• Inverter uses a compatible 24V battery platform
• Required capacity is appropriate for 100Ah / 2.56kWh
• Charge current remains <100A
• Recommended discharge power remains <2,500W
• Required backup duration
• Correct DC cable sizing
• Appropriate DC protection
• Correct charging parameters

A 24V inverter should not automatically be considered compatible based on nominal voltage alone. Its actual battery operating range and charging requirements must also match.

Usage & Installation Notes

• Keep recommended charge current below 100A
• Keep recommended discharge power below 2,500W
• Match with compatible 24V equipment
• Configure inverter charging correctly
• Use appropriately sized DC cables
• Install suitable DC protection
• Observe correct polarity
• Protect battery terminals from short circuits
• Securely position the battery as a non-wall-mounted unit
• Follow Felicity’s recommended operating conditions

Mini FAQ

What is the exact model?
Felicity FLA24100PG2.

What is its capacity?
2.56kWh | 24V | 100Ah.

Why is its 24V configuration useful?
It provides a native 24V 100Ah battery from one unit, rather than requiring two separate 12V batteries to create the nominal 24V supply.

What is the recommended discharge power?
Below 2,500W.

What is the recommended charge current?
Below 100A.

What is the DOD?
95% DOD.

What is the cycle rating?
≥6000 cycles at 25°C.

Is it wall mounted?
No. The FLA24100PG2 is non-wall-mounted.

Why Buy from Macire

• Exact Felicity FLA24100PG2
• 2.56kWh | 24V | 100Ah
• Grade A
• High 95% DOD
• ≥6000 cycles @ 25°C
• Recommended charge current <100A
• Recommended discharge power <2,500W
• Native 24V configuration
• Professional battery and inverter matching support

Visit us: Kenafric Business Park, Ruaraka, Nairobi
WhatsApp: 0750 00 66 00
Calls: 0713 520 969 / 0718 762 530
Website: Macire