50A Phoenix Digital Solar Charge Controller
KSh 3,495.00KSh 7,000.00 (-50%)
50A Phoenix Digital Solar Controller
???? ⚡ 50A Smart PWM Controller for 12V/24V Systems
???? ???? LCD Display with Battery & Panel Monitoring
???? ???? Dual USB Ports for Gadget Charging
???? ????️ Advanced Safety Protection & Load Control
???? ☀️ Ideal for Home, Workshop, or Rural Solar Setups
???? ???? Available now at Macire
You may also like
-
KSh 18,595.00
KSh 43,400.00
???? 50A Phoenix Digital Solar Charge Controller – Smart High-Capacity Solar Regulation by Macire ☀️⚡
Unlock maximum efficiency for your off-grid or hybrid solar system with the 50A Phoenix Digital Solar Charge Controller, now available from Macire! Whether you’re running a small commercial setup, residential solar system, or powering essential loads in a remote area, this controller is engineered for stable power flow, longer battery life, and complete system protection.
Designed with PWM charging technology, dual USB output, and real-time LCD display, the Phoenix 50A is your go-to solar brain — intelligently managing how your solar panels interact with your batteries and connected loads.
???? Key Features & Benefits ⚙️
✅ High Charging Capacity – 50 Amps
➡️ Supports up to 600W (12V) or 1200W (24V) solar input power.
✅ Auto 12V/24V Battery Recognition
➡️ Automatically detects your system voltage for hassle-free setup.
✅ Smart PWM Charging Technology
➡️ Extends battery lifespan and improves charging efficiency with bulk, float, and equalization stages.
✅ LCD Display + LED Indicators
➡️ Easy monitoring of charging status, voltage, battery level, and errors.
✅ Dual USB Ports (5V/2A)
➡️ Power phones, lights, or USB devices directly from the controller.
✅ Intelligent Load Control
➡️ Set timer modes or dusk-to-dawn automation for lighting or other DC loads.
✅ Complete Safety Protection
➡️ Overload, overcharge, short circuit, over-discharge, reverse polarity, and overheat protection built-in.
???? Technical Specifications
| Feature | Specification |
|---|---|
| Rated Current | 50A |
| System Voltage | 12V / 24V Auto-Detect |
| Max Solar Input Power | 600W (12V) / 1200W (24V) |
| Charging Mode | PWM |
| Display | LCD + LED Indicators |
| USB Output | Dual 5V/2A USB Ports |
| Max Input Voltage | ≤ 50V |
| Protection Features | Overload, Short Circuit, Reverse Polarity, Overcharging, Discharge Protection |
| Operating Temp | -20°C to +60°C |
| Material | ABS fireproof enclosure |
???? Ideal Applications
???? Home solar power systems
????️ Off-grid cottages & cabins
???? Workshop or shed solar setups
???? Rural school power systems
???? Solar-powered irrigation setups
????️ Backup systems for security & CCTV
???? Automated solar lighting solutions
???? What Can You Power?
With a properly sized battery system, the 50A controller allows control over:
-
???? Up to 4x 150W solar panels (parallel for 12V, series/parallel for 24V)
-
???? 2–4 deep cycle batteries (12V 100Ah+ recommended)
-
???? LED lights, fans, routers, laptops, TVs, pumps, or alarms
-
???? Medium-size DC loads up to 50A (max)
???? Macire Maintenance Tips for Longevity ????️
???? Clean the LCD screen & air vents monthly
???? Always tighten terminal screws to avoid overheating
???? Monitor battery voltage weekly to prevent deep discharge
???? Keep it indoors in a dry and shaded area
???? Replace wires if signs of wear, corrosion, or fraying appear
???? Use correctly rated fuses between panels and controller
???? DIY Installation Guide – Easy & Safe Setup
-
Mount the controller on a dry indoor surface
-
Connect the battery wires first (red = +, black = –)
-
Connect your solar panel wires next
-
Attach DC load wires (optional)
-
Power ON the controller and observe the LCD for system status
-
Set timer mode or lighting schedule as needed
⚠️ Do’s and Don’ts ????
✅ DO:
✔️ Use only 12V/24V battery systems
✔️ Keep panel voltage below 50V
✔️ Use proper gauge cables (8 AWG or thicker recommended)
✔️ Monitor for fault codes regularly
✔️ Mount in a well-ventilated space
❌ DON’T:
❌ Use with lithium batteries unless supported
❌ Connect or disconnect wires when system is ON
❌ Exceed 50A total current
❌ Install in areas exposed to direct water or extreme heat
❓ FAQs
Q1: Can I use this with a 24V battery bank?
✅ Yes – it will auto-detect between 12V or 24V systems.
Q2: What size panels can I use with this controller?
✅ Up to 600W (12V) or 1200W (24V), e.g. 4x 150W panels.
Q3: Can I run lights directly from the controller?
✅ Yes – the load output supports DC lighting with timer or manual mode.
Q4: Does it shut off when the battery is full?
✅ Yes – switches to float mode automatically to prevent overcharging.
Q5: Does it support lithium batteries?
❌ Not by default. Check if your model includes lithium charging support.
???? What’s in the Box?
???? 1x 50A Phoenix Digital Solar Charge Controller
???? 1x Installation Guide
???? 1x Wall Mount Kit
???? 1-Year Warranty Card by Macire
✅ Why Buy the Phoenix 50A Controller from Macire?
Because it’s powerful, reliable, and designed for Kenya’s solar-ready future. For clean power management with confidence, go with Macire’s trusted solar solutions – proven in real-world conditions.
???? Available at Macire Limited – Barkat Biashara Mall, Kumasi Road, Opp. Simba Coach, Nairobi
???? Call/WhatsApp: +254 718 762 530
???? Shop Online at: www.macire.co.ke
???? SEO Hashtags for Visibility
#PhoenixSolarController #50AChargeController #SolarPWMController #MacireSolar #SolarChargeControllerKenya #PWMRegulator50A #DigitalSolarController #MacireLimited #24VSolarController #OffGridPowerSolutions
50A Phoenix Digital Solar Controller
???? ⚡ 50A Smart PWM Controller for 12V/24V Systems
???? ???? LCD Display with Battery & Panel Monitoring
???? ???? Dual USB Ports for Gadget Charging
???? ????️ Advanced Safety Protection & Load Control
???? ☀️ Ideal for Home, Workshop, or Rural Solar Setups
???? ???? Available now at Macire












Reviews
There are no reviews yet.