???? 5.5HP Aico Japan WQD10-60 Sewage Submersible Pump – 4KW, 80m Head, Three Phase, 2-Inch Outlet ⚡????

???? Massive 5.5HP power for heavy-duty sewage pumping!
⚡ 4KW three-phase motor ensures stable, high performance.
???? Lifts water & sludge up to 80 metres effortlessly.
???? Perfect for industries, construction, farms & flood control.
???? Durable Japanese cast iron body with non-clog impeller.
✅ Trusted Macire quality – built for endurance & reliability!

⚙️ Key Technical Specifications

• Brand/Model: Aico Japan – WQD10-60-4KW

• Motor Power: 5.5HP (4KW)

• Voltage/Phase: Three Phase (380V, 50Hz)

• Max. Head Lift: 80 metres

• Max. Flow Rate: ~10–12 m³/hr (approx.)

• Pump Type: Heavy-duty sewage submersible pump

• Material: Cast iron body with anti-corrosion finish

• Outlet Size: 2 inches (50mm)

• Weight: ~45–50Kg

???? Applications & Use Areas

✔️ Industrial wastewater management – factories, plants & workshops ????
✔️ Construction sites – dewatering tunnels, pits & basements ????
✔️ Agriculture – pumping slurry & irrigation water ????
✔️ Sewage treatment plants – sludge & effluent handling ????
✔️ Flood emergencies – draining flooded compounds & estates ????

???? Maintenance Tips

???? Always operate with pump fully submerged ????
???? Inspect seals, bearings & cables regularly ????
???? Clean impeller to prevent blockages ????
???? Ensure stable three-phase power ⚡
???? Lubricate moving parts as per service schedule

???? DIY Guide – Quick Setup

1️⃣ Place pump vertically in sewage pit or flooded area ????
2️⃣ Connect 2-inch discharge pipe/hose firmly ????
3️⃣ Wire to a stable 380V three-phase power supply ⚡
4️⃣ Switch ON – pump auto-primes and drains sewage ????
5️⃣ Monitor flow, avoid running without water ????

⚠️ Do’s & Don’ts

✅ Do use for sewage, flood water, sludge & slurry pumping
✅ Do ensure safe electrical connections with proper earthing
❌ Don’t pump petrol, diesel or corrosive acids
❌ Don’t exceed rated head & flow capacity
❌ Don’t run pump dry – it damages motor seals

❓ FAQs

Q: How high can this pump lift water?
A: Up to 80 metres head, making it suitable for deep pits & tall discharge points.

Q: Can it handle solids?
A: Yes ✅ – fitted with a non-clog impeller to manage sewage & sludge.

Q: Is it only for industrial use?
A: No – it works for farms, estates, and even flood emergency drainage.

Q: Does it need professional installation?
A: Yes – because it’s three-phase, an electrician is recommended for wiring.

???? Hashtags

#5_5HPPump #AicoJapan #SewagePump #SubmersiblePump #MacireSolutions #WasteWaterManagement #FloodControlPump #ThreePhasePump #KenyaPumps

???? Available now at Macire Limited, Barkat Biashara Mall, Kumasi Road – Opp. Simba Coach
???? Call/WhatsApp: +254 718 762 530
???? Visit: www.macire.co.ke