Milano Italia Petrol Poker Vibrator Complete with 45mm Poker Shaft

The Milano Italia Petrol Poker Vibrator Complete with 45mm Poker Shaft is designed for efficient compaction of freshly poured concrete in construction and civil engineering applications. Its petrol-powered operation provides reliable performance without depending on an electrical supply, making it suitable for active building sites and remote project locations.

The included 45mm flexible poker shaft transfers vibration directly into wet concrete to remove trapped air, reduce internal voids, and improve overall concrete density. Proper vibration helps minimize honeycombing around reinforcement while supporting stronger, more uniform structural elements.

This portable concrete vibrator is suitable for compacting foundations, floor slabs, columns, beams, retaining walls, footings, and other reinforced concrete sections. Milano Italia combines practical site mobility with dependable concrete-compaction performance, while Macire provides product support and delivery across Kenya.

⭐ Genuine Product | Verified & Supported by Macire

📦 Package Includes

• 1 × Milano Italia Petrol Poker Vibrator
• 1 × 45mm Flexible Poker Shaft
• Flexible Drive Assembly

⚙️ System Configuration

The complete system consists of a petrol-powered drive unit connected to a flexible shaft and a 45mm vibrating poker head. Engine power is transferred through the shaft to the poker, generating the vibration required to consolidate freshly poured concrete.

This independent petrol configuration allows the unit to operate in locations where mains electricity is unavailable or inconvenient.

📊 Technical Specifications

🔧 Key Features

Complete Concrete-Vibration Set

Supplied with a 45mm flexible poker shaft, providing the essential components required for concrete-compaction work.

Petrol-Powered Operation

Operates independently of mains electricity, making it practical for outdoor sites and developing construction projects.

45mm Poker Head

The 45mm diameter is suitable for general concrete work, including slabs, columns, beams, foundations, and footings.

Effective Air-Void Removal

Vibration helps release trapped air from wet concrete, improving density and reducing visible honeycombing.

Flexible Shaft Access

The shaft can be guided into reinforcement zones and formwork where direct access may be limited.

Portable Site Design

Can be repositioned between concrete-pouring areas without requiring electrical extension cables.

Improved Concrete Uniformity

Supports better settlement of concrete around reinforcement and within corners of formwork.

Construction-Site Durability

Designed for routine concrete work in residential, commercial, and civil construction environments.

🎯 Ideal Applications

• Concrete floor slabs
• Foundations and footings
• Reinforced columns
• Beams and lintels
• Retaining walls
• Concrete tanks
• Road and drainage structures
• Residential building projects
• Commercial construction
• Civil engineering works

🛠 Operating Instructions

1. Position the petrol drive unit on firm, level ground.
2. Inspect the poker head, flexible shaft, and connection points before starting.
3. Start the engine according to the operating procedure.
4. Insert the poker vertically into freshly poured concrete.
5. Allow vibration to continue until trapped air bubbles reduce and the surface settles.
6. Withdraw the poker slowly to prevent leaving an empty pocket.
7. Repeat at evenly spaced points throughout the concrete section.
8. Switch off the engine before moving or inspecting the equipment.

⚠️ Installation and Engineering Notes

• Use the poker while the concrete is still workable.
• Insert the poker close enough for adjacent vibration zones to overlap.
• Avoid pressing the poker directly against reinforcement or formwork.
• Do not use the shaft to drag or spread concrete.
• Keep the engine unit outside the wet concrete area.
• Avoid excessive vibration, which may cause segregation.
• Ensure adequate ventilation when operating the petrol engine.

🧰 Care and Maintenance

• Clean the poker head immediately after use.
• Wipe concrete residue from the flexible shaft before it hardens.
• Inspect the shaft casing for cuts, cracks, or excessive wear.
• Keep connection points clean and securely tightened.
• Check the engine oil level before operation.
• Clean the air filter regularly.
• Drain stale fuel before extended storage.
• Store the machine in a dry and protected location.
• Follow the recommended engine-service schedule.

✅ Do’s and Don’ts

Do

• Wear gloves, safety boots, eye protection, and hearing protection.
• Inspect the machine before every concrete pour.
• Insert and withdraw the poker gradually.
• Clean the poker immediately after operation.
• Use the machine in well-ventilated outdoor areas.

Don’t

• Do not operate the petrol engine indoors without proper ventilation.
• Do not run the poker outside concrete for extended periods.
• Do not bend the flexible shaft sharply.
• Do not pull the machine using the shaft.
• Do not over-vibrate one section of concrete.
• Do not refuel while the engine is running or hot.

🔄 Compatibility

The Milano Italia Petrol Poker Vibrator is suitable for general wet-concrete compaction where a 45mm poker diameter can move comfortably between reinforcement bars and within the formwork.

For heavily reinforced or narrow concrete sections, operators should ensure there is adequate clearance for the poker head before insertion.

📈 Application Guide

❓ Frequently Asked Questions

What is included with the vibrator?

The package includes the Milano Italia petrol vibrator drive unit and a 45mm flexible poker shaft.

Does the machine require electricity?

No. It operates using a petrol engine and is suitable for construction sites without mains electricity.

What does a poker vibrator do?

It vibrates freshly poured concrete to release trapped air and improve concrete density around reinforcement and inside formwork.

Where can the 45mm poker be used?

It is suitable for foundations, slabs, columns, beams, footings, retaining walls, and general structural concrete work.

Can it be used on hardened concrete?

No. Poker vibrators are designed for freshly poured concrete before it sets.

How long should the poker remain in one position?

It should remain only until the concrete settles and visible air bubbles reduce. Excessive vibration should be avoided.

Is it suitable for reinforced concrete?

Yes, provided there is enough clearance between reinforcement bars for the 45mm poker head.

Does Macire provide product support?

Yes. Macire provides product guidance, nationwide delivery, and dependable after-sales support.

💎 Why Buy From Macire?

• Genuine Milano Italia construction equipment
• Complete unit with 45mm poker shaft
• Suitable for professional concrete work
• Technical product guidance
• Nationwide delivery across Kenya
• Reliable after-sales support
• Competitive pricing
• Verified construction equipment supplier

Macire – Inspired Living. ✨

Macire – Inspired Living. ✨