93M Dayliff DSD 3/13 Submersible Well Pump – 0.75kW
KSh24,500.00KSh35,000.00 (-30%)
🚰 93M Dayliff DSD 3/13 Submersible Well Pump – 0.75kW (1HP) | Single Phase
💧 Deep Borehole Power You Can Trust – Backed by Macire
🔸 Lifts water up to 93M
🔸 Flow rate: ~2.5–3.0m³/hr
🔸 0.75kW single-phase motor
🔸 3″ submersible stainless steel body
🔸 Includes thermal-protected control box
🔸 Ideal for homes, tanks, farms, and irrigation
🔸 1-Year Warranty – Macire Limited
You may also like
-
KSh6,325.00Inquire via WhatsApp
KSh15,995.00 -
KSh19,450.00Inquire via WhatsApp
KSh48,799.00 -
KSh13,899.00Inquire via WhatsApp
KSh37,998.00 -
93M Dayliff DSD 3/13 Submersible Well Pump – 0.75kW | 1-Phase Deep Borehole Solution 💧
🚰 High Head Water Delivery for Homes, Farms & Institutions – Powered by Macire 🔧⚡
The Dayliff DSD 3/13 Submersible Well Pump is a high-performance, 0.75kW single-phase pump designed to deliver water from deep boreholes of up to 93 meters. Built with robust stainless-steel construction, a compact 3″ design, and efficient multistage impellers, this pump is ideal for domestic, agricultural, school, and institutional water supply.
Backed by the expertise and warranty support of bold Macire, this Dayliff DSD pump ensures consistent, long-term water access in areas with low groundwater or deep borehole setups – even where solar is not applicable.
🔧 Key Features – Trusted by Macire:
🔹 Deep Borehole Reach – Up to 93M Total Head
Ideal for deep installations and tall overhead tanks.
🔹 0.75kW (1HP) Motor – 1-Phase, 220V
Powerful, energy-efficient single-phase motor for clean water pumping.
🔹 Multistage Impellers (13 stages)
Provides strong pressure for higher elevation delivery and pressurized systems.
🔹 3″ Slim Submersible Design
Fits narrow boreholes and wells with smaller casing diameters.
🔹 High Flow Rate – Up to 2.5–3.0m³/hr
Great for household consumption, irrigation, or livestock use.
🔹 Durable Stainless Steel Build
Rust-proof, sand-tolerant housing ideal for Kenyan borehole conditions.
🔹 Control Box Included
For thermal and overload protection and ease of use.
📊 Technical Specifications (Verified by Macire):
| Feature | Specification |
|---|---|
| Brand | Dayliff |
| Model | DSD 3/13 |
| Motor Rating | 0.75kW / 1.0HP |
| Voltage | 220V (Single Phase) |
| Max Head (Lift) | 93M |
| Max Flow Rate | 2.5 – 3.0m³/hr |
| Pump Diameter | 3 Inch |
| Outlet Size | 1.25″ |
| Pump Type | Submersible – Multistage |
| Cable Requirement | 3-core Submersible Cable (not included) |
| Motor Type | Oil-Filled with Overheat Protection |
| Construction | Stainless Steel + Thermoplastics |
🌾 Application Areas – Where It Works Best:
✔️ Domestic deep borehole pumping
✔️ High overhead tank supply
✔️ Water for schools, churches, or rental properties
✔️ Garden and greenhouse irrigation
✔️ Livestock water systems
✔️ Pressure boosting for multi-storey buildings
🛠️ Maintenance Tips – By Macire Professionals:
✅ Install with a non-return valve to prevent backflow
✅ Always fully submerge the pump before operation
✅ Avoid muddy or sandy boreholes – use with filtration if needed
✅ Check amp readings monthly to detect early motor issues
✅ Use waterproof cable joints with resin sealing
✅ Clean pump filter/inlet every 3–6 months
✅ Store unused pumps in a dry upright position
🧰 DIY Setup Guide – Simplified by Macire:
-
Use a borehole depth tester to confirm pump installation level
-
Mount the control box securely near power source
-
Lower pump using nylon rope + drop pipe carefully
-
Connect cable using resin sealed joints
-
Ground the motor and control box properly
-
Power ON and test pressure, flow, and switch off delay
💡 Macire provides installation support and referrals to certified installers across Kenya.
✅ Do’s & Don’ts:
✅ DO:
-
Use with a float switch if pumping to tank
-
Install lightning protection in exposed rural areas
-
Use proper cable gauge based on depth
-
Keep pump submerged at all times
❌ DON’T:
-
Use in boreholes with silt or corrosive water
-
Power the pump without a control box
-
Use loose cable joints or exposed wires
-
Oversize your tank without considering recharge time
❓ FAQs – Powered by Macire:
Q1: Can this pump reach 93M?
👉 Yes – the DSD 3/13 is designed for total head heights up to 93 meters.
Q2: Is it solar compatible?
👉 Not directly. You’ll need an inverter or choose a Dayliff solar-ready model.
Q3: Is a control box included?
👉 Yes – it comes with a single-phase control box with built-in protection.
Q4: What cable size should I use?
👉 For depths of 60M–100M, use 4mm² 3-core submersible cable (confirm with electrician).
Q5: Can it be used continuously?
👉 Yes – rated for continuous operation if well water level and cooling are sufficient.
📦 What’s in the Box?
-
✅ Dayliff DSD 3/13 Submersible Pump
-
✅ Control Box (1-Phase)
-
✅ Instruction Manual
-
✅ 1-Year Warranty Card from Macire
📍 Available at:
Macire Limited – Barkat Biashara Mall, Kumasi Road (Opp. Simba Coach)
📞 Call/WhatsApp: +254 718 762 530
🌐 Visit: www.macire.co.ke
🚰 93M Dayliff DSD 3/13 Submersible Well Pump – 0.75kW (1HP) | Single Phase
💧 Deep Borehole Power You Can Trust – Backed by Macire
🔸 Lifts water up to 93M
🔸 Flow rate: ~2.5–3.0m³/hr
🔸 0.75kW single-phase motor
🔸 3″ submersible stainless steel body
🔸 Includes thermal-protected control box
🔸 Ideal for homes, tanks, farms, and irrigation
🔸 1-Year Warranty – Macire Limited
#DayliffDSD #93MPump #BoreholeWaterPump #MacireLimited #DeepWellPump #SubmersiblePumpKenya #1HPPump #DSD3Series #DayliffKenya #MacirePumps















Reviews
There are no reviews yet.