5.12kWh Lithium Valley Wall Mounted Lithium Battery – 51.2V, 100Ah, LiFePO₄ Storage

Product Overview

The 5.12kWh Lithium Valley Wall Mounted Lithium Battery is a compact energy storage solution designed for solar systems, backup power, and hybrid inverter installations. Built around LiFePO₄ lithium technology, it delivers stable 51.2V output and approximately 100Ah capacity for dependable daily cycling and standby support. Its wall mounted design helps save floor space while keeping installation neat and professional.

This battery is ideal for Kenyan homes, offices, clinics, and small commercial sites seeking reliable power during outages or better use of solar energy during the day and at night. It supports cleaner energy storage, longer cycle life, and lower maintenance compared to many conventional battery options. Macire helps verify suitability, recommend compatible inverters, and guide safe installation and delivery across Kenya.
⭐ Genuine Product | Verified & Supported by Macire

System Architecture & Configuration

Core Battery System

Uses Lithium Iron Phosphate (LiFePO₄) cells for improved cycle life, thermal stability, and dependable deep-cycle performance.

Energy Storage Capacity

Provides 5.12kWh nominal storage capacity, suitable for backup loads, solar storage, and essential appliance support.

Battery Management System

Integrated BMS helps manage charging, discharging, cell balancing, over-voltage, under-voltage, and temperature protection.

Mounting & Construction

Wall mounted enclosure supports tidy indoor installation and space-saving system layout.

Safety & Reliability

Designed for stable operation with inverter-based backup and solar systems, with typical protections recommended by Macire for proper setup.

Technical Specifications

*Typical industry-standard assumption where exact model data is not provided.

Key Features

• 5.12kWh storage capacity for daily backup and solar energy use

• 51.2V architecture suited for many modern inverter systems

• LiFePO₄ chemistry for longer life and improved safety

• Wall mounted design saves floor space

• Built-in BMS for battery protection and balanced operation

• Suitable for homes, offices, clinics, and light commercial use

• Low maintenance compared to many lead-acid alternatives

• Supports cleaner and more efficient solar energy storage

• Good option for frequent outage areas

• Professional installation guidance available through Macire

• Compatibility advice available before purchase through Macire

• Kenya-wide supply and technical support from Macire

Applications / Use Cases

• 🏠 Homes – backup for lights, TVs, routers, fridges, and essential appliances

• 🏢 Offices – supports computers, networking, lighting, and security systems

• 🏥 Clinics – helps keep critical small loads powered during outages

• 🚜 Farms – useful for solar-powered control rooms and basic equipment support

• 🔧 Workshops – supports selected low-to-medium backup loads

• 🏭 Light commercial use – ideal for shops, counters, and service points

Installation & Engineering Notes

• Install on a strong indoor wall with proper anchoring

• Keep away from direct rain, excessive dust, and heat sources

• Use with a compatible inverter/charger and correct battery settings

• Provide proper cable sizing, isolation, and protection devices

• Confirm communication compatibility where smart integration is required

• Macire can guide battery sizing, inverter matching, and installation planning

Care, Maintenance & Operations

• Keep the battery in a clean, dry, ventilated area

• Use recommended charging settings for LiFePO₄ batteries

• Avoid repeated overloading of the connected inverter system

• Check cable tightness and terminal condition periodically

• Monitor battery status through inverter or BMS interface where available

• Do not leave the battery fully discharged for long periods

• Follow proper shutdown and startup procedures during servicing

• Service support and accessory guidance are available through Macire

Do’s & Don’ts

✅ Do’s

• Install using correct protective devices

• Match with a compatible hybrid or inverter system

• Use recommended charge and discharge settings

• Mount on a solid wall in a safe indoor location

• Allow ventilation around the unit

• Size the battery according to expected load and runtime

• Consult Macire for correct system configuration

❌ Don’ts

• Do not install in wet or outdoor exposed areas

• Do not short circuit terminals

• Do not mix with unmatched old battery banks

• Do not use incorrect charging voltages

• Do not block ventilation space

• Do not overload the connected inverter continuously

• Do not attempt unauthorized internal repairs

Compatibility Section

Compatible with:

• 48V / 51.2V hybrid inverters

• Solar backup systems

• Off-grid and hybrid energy storage setups

• Inverter chargers with lithium battery settings

• CAN / RS485 capable systems where supported

• DC protection accessories and battery isolators

• Macire-supplied inverter, cabling, and protection accessories

Performance / Runtime Table

Performance depends on inverter efficiency, battery settings, depth of discharge, and load sizing as guided by Macire.

Mini FAQ

1. Is 5.12kWh enough for home backup?
Yes, it is suitable for essential household loads and can support longer runtime when loads are managed well.

2. Can it work with solar inverters?
Yes, it is designed for use with compatible hybrid and inverter systems using the correct voltage and charging profile.

3. Does Macire help with installation guidance?
Yes, Macire can advise on compatibility, sizing, and installation requirements.

4. Is lithium better than lead-acid for this use?
For many users, yes. LiFePO₄ batteries usually offer longer cycle life, better usable energy, and lower maintenance.

5. Is nationwide delivery available?
Yes, Macire supports delivery across Kenya subject to location and logistics arrangements.

Why Buy From Macire

Macire supplies genuine power and energy products for the Kenyan market.
Each product is reviewed for suitability before dispatch.
Macire helps customers choose compatible inverters and battery setups.
Support is available for installation planning and system matching.
Kenya-wide delivery is available for homes, businesses, and project sites.
Macire assists with technical guidance before and after purchase.
Customers benefit from practical product recommendations, not guesswork.
Accessories and related system components can also be sourced through Macire.
Macire is a trusted Kenyan supplier serving residential and commercial power needs.
You get verified support, clear guidance, and dependable follow-through.