2″ 7HP TOTAL Petrol Water Pump TP3202 (550L/min 32m Head)

The TOTAL 2″ Petrol Water Pump – TP3202 is built for raw power and dependable performance in even the toughest pumping tasks. Powered by a strong 7HP petrol engine, this portable water pump is the perfect solution for farms, construction sites, and emergency flood control. ⚡💧

Certified by Macire, the TP3202 combines high flow capacity (550 litres per minute) with a maximum head of 32 metres — giving you serious pumping strength for transferring water quickly and efficiently over long distances. Designed with rugged materials, this model is easy to start, easy to maintain, and dependable for continuous field use.

Whether you’re irrigating crops, filling tanks, or draining flooded areas, the Macire-approved TOTAL TP3202 gives you unmatched performance and durability in its class. 🚜

---

⚙️ Technical Specifications

• Engine Power: 7.0HP (4-stroke, air-cooled petrol engine)

• Displacement: Approx. 208cc

• Fuel Type: Unleaded petrol

• Flow Rate: 550L/min (33m³/h)

• Maximum Head: 32m

• Suction Lift: 7m

• Inlet/Outlet Diameter: 2″ x 2″

• Starting System: Recoil (manual start)

• Fuel Tank Capacity: 3.6–4.0L

• Pump Casing Material: Aluminium alloy – rust-resistant

• Frame: Heavy-duty steel roll-cage

• Net Weight: Approx. 25–28kg

---

🏠 Application Areas

Perfect for:

• Farm and crop irrigation 🌾

• Construction site water transfer 🏗

• Flood and drainage control 🌧

• Livestock water supply 🐄

• Filling or emptying tanks and ponds 💧

• General water transfer for estates and institutions 🏫

---

🔧 Installation & Setup Tips

• Mount on stable ground — keep the pump level during use.

• Fill the pump housing with water before starting (priming).

• Ensure suction hose is airtight with a foot valve at the inlet.

• Always use clean, fresh petrol and check oil level before starting.

• Allow engine to warm up 1–2 minutes before full-load operation.

---

🧰 Care & Maintenance

• Change engine oil after the first 20 hours, then every 50 hours of use.

• Clean the air filter weekly in dusty environments.

• Drain fuel tank and carburetor if storing for long periods.

• Tighten bolts and check hoses before each job.

• Store in a dry area and cover after use.

---

⚠️ Do’s & Don’ts

✅ Do run the pump with proper priming and adequate fuel.
✅ Do keep suction hose submerged at least 15cm underwater.
❌ Don’t run dry — it will damage the impeller.
❌ Don’t operate near open flames or indoors without ventilation.

---

☀️ Solar / Hybrid Integration (Macire Backup Ready)

While primarily petrol-powered, this pump complements Macire Solar Borehole and Electric Pump Systems as an emergency backup for off-grid installations — ensuring continuous water flow during low-sun or power-outage periods. ⚙️🌞

---

📊 Performance Guide

---

❓ Mini FAQ

Q1: How long can it run on one tank?
A1: Up to 2.5–3 hours at full load depending on altitude and fuel quality.

Q2: Can it pump slightly dirty water?
A2: Yes — suitable for clean or slightly muddy water (not sewage).

Q3: What oil should I use?
A3: SAE 10W-30 or 15W-40 engine oil for 4-stroke engines.

Q4: What’s the maximum suction depth?
A4: 7 metres from the water surface.

Q5: Warranty?
A5: Covered under Macire Quality Guarantee (1-Year Warranty) against manufacturing defects.

---

💎 Why Choose Macire?

At Macire, we believe in power you can trust. Every pump we supply — from petrol to solar — is built for performance, reliability, and service excellence. When your job demands strength and speed, Macire delivers Inspired Living with dependable pumping solutions that last. 💪💧

---

#Macire #WaterPumps #TOTALTools #PetrolWaterPump #IrrigationSolutions #FarmMachinery #DrainageEquipment #InspiredLiving