0.75kW 1.0HP TOTAL Sewage Submersible Pump Electric AC TWP87506 750w (Dirty Water 8m Head 217L/min)

For heavy-duty drainage, flood control, or waste-water transfer, the TOTAL 0.75kW (1.0HP) Sewage Submersible Pump – TWP87506 delivers powerful, dependable performance. ⚡💪
Certified and supplied by Macire, this rugged 750-watt pump is built to handle dirty water, sludge, and waste solids effortlessly. It moves up to 217 litres per minute with a maximum head of 8 metres, making it a top pick for construction sites, farms, septic systems, and industrial waste pits.

Designed with a corrosion-resistant cast-iron body and a durable vortex impeller, this Macire-approved pump offers both reliability and longevity — a true workhorse for challenging environments.

⚙️ Technical Specifications

• Power: 0.75kW (1.0HP)

• Voltage: 220–240V AC, 50Hz

• Flow Rate: 217L/min (≈13m³/h)

• Max Head: 8m

• Outlet Size: 2 inch

• Pump Type: Sewage / Dirty Water Submersible Pump

• Model: TWP87506

• Motor Type: Single-phase induction

• Material: Cast-iron housing & impeller for high durability

• Protection: IPX8 (fully submersible)

• Cooling: Water-cooled continuous duty

• Cable Length: 10m

• Weight: Approx. 12kg

🏭 Application Areas

Perfect for:

• Wastewater & sewage pits 🚧

• Flooded basements or storm drains 🌧

• Construction site drainage 🏗

• Livestock, piggery, or poultry waste disposal 🐖

• Septic & soak-pit pumping systems 🧱

• General dirty-water transfer in farms & factories ⚙️

🔧 Installation & Setup Tips

• Always install vertically, fully submerged, with a secure rope or handle (never lift by cable).

• Fit a float switch for automatic start/stop based on water level.

• Use flexible 2″ hose with proper clamps for outlet connection.

• Keep debris screens or grates around the pump to prevent clogging by large solids.

• Ensure proper electrical earthing for safety.

🧰 Care & Maintenance

• Flush clean water through the pump after use in sludge or waste pits.

• Check impeller and casing for buildup or blockages.

• Grease or inspect seals periodically for leakage.

• Dry and store indoors when not in use for long periods.

⚠️ Do’s & Don’ts

✅ Do ensure it remains submerged during operation.
✅ Do clear large debris before placing in pit.
❌ Don’t use for clean drinking water.
❌ Don’t operate dry or partially submerged.
❌ Don’t lift the pump by its power cord.

☀️ Solar & Backup Integration (Macire Solar Ready)

Can be integrated into a Macire Solar Drainage System for remote or off-grid use:

• Small Setup: 2kVA inverter + 4×300W panels + 200Ah battery

• Medium Setup: 3kVA inverter + 6×300W panels + 2×200Ah batteries

This setup allows flood-resistant, energy-saving pumping anywhere. 🌞

📊 Performance Guide

❓ Mini FAQ

Q1: Can it handle solids?
A1: Yes — up to medium-sized particles commonly found in dirty water and sludge.

Q2: Can it be used for continuous operation?
A2: Yes, if fully submerged and properly cooled.

Q3: Can it run on solar?
A3: Yes — compatible with Macire Solar Inverter Systems.

Q4: What protection does it have?
A4: IPX8 waterproofing with thermal overload protection.

Q5: What warranty is offered?
A5: 1-year Macire Quality Guarantee covering manufacturing defects.

💎 Why Choose Macire?

At Macire, we combine innovation, reliability, and service to power every industry. Our sewage and drainage pumps are tested for Kenyan conditions — strong, efficient, and built to last. When you buy from Macire, you invest in Inspired Living and long-term peace of mind. 💧

#Macire #SewagePump #SubmersiblePump #DirtyWaterPump #DrainageSolutions #IndustrialTools #TOTALTools #InspiredLiving