50L Toller Powder Coating Machine – 500g/min with 4m Gun Cable

The 50L Toller Powder Coating Machine is a dedicated surface-finishing system designed for applying powder coating to compatible metal components, fabricated products and workshop projects.

Its 50-litre powder capacity provides a substantial material supply for repeated coating work, making the machine particularly relevant to fabrication workshops and metal-finishing operations handling multiple components.

With a specified powder output of 500g/min, the machine is configured for controlled powder delivery during coating operations. This gives operators a defined material-output specification when planning finishing jobs.

The supplied 4-metre gun cable provides useful working reach around larger workpieces, allowing the operator to reposition the coating gun without keeping the main machine immediately beside every section being coated.

Technical Specifications

Key Features

• Large 50L capacity
• Specified 500g/min powder output
• 4m gun cable for extended working reach
• Designed for powder-coating applications
• Suitable for compatible metal surfaces
• Useful for fabrication and finishing workshops
• Practical for repeated coating operations
• Provides controlled powder application
• Suitable for coating different compatible fabricated components
• Designed for professional workshop finishing applications

50L Capacity Advantage

The 50-litre capacity is particularly useful where powder coating is carried out regularly rather than only for occasional small components.

A larger material capacity means the machine can hold a substantial powder supply for repeated application work, helping reduce the need for frequent replenishment during larger coating jobs.

The actual usable powder quantity will depend on the coating material and the manufacturer’s filling requirements.

500g/min Powder Output Advantage

The machine is specified with a powder output of 500 grams per minute.

This output specification is particularly important when evaluating the machine for regular metal-finishing work because it provides a defined powder-delivery capability rather than simply describing the unit as a generic coating machine.

Actual coating coverage will depend on factors including the workpiece geometry, powder formulation, application settings and operator technique.

4m Gun Cable Advantage

The 4-metre gun cable gives the operator useful reach between the main coating unit and the application area.

This is particularly valuable when working around:

• Larger fabricated components
• Gates and metal frames
• Multiple components positioned in a coating area
• Workshop structures
• Irregularly shaped metal parts

The additional working reach allows easier repositioning of the coating gun around compatible workpieces.

Metal Finishing Advantage

Powder coating is used to apply a dry coating material to appropriately prepared surfaces before the required curing process.

For fabrication workshops, this provides a finishing method suitable for compatible metal products such as:

🚪 Gates & Metal Frames – useful for finishing fabricated metal structures.

🪑 Metal Furniture – suitable for compatible chairs, tables, frames and furniture components.

⚙️ Machine Components – practical for appropriately prepared metal parts.

🏗️ Fabricated Products – useful for workshop-manufactured brackets, housings and structural components.

🚗 Automotive Components – suitable for compatible prepared metal parts where powder coating is specified.

Fabrication Workshop Advantage

The combination of:

50L Capacity + 500g/min Powder Output + 4m Gun Cable

makes this Toller machine particularly relevant to workshops carrying out repeated metal-finishing work.

Rather than positioning it as a generic painting machine, this model is specifically suited to powder application on properly prepared compatible surfaces as part of a complete powder-coating process.

Applications / Use Cases

🏭 Metal Fabrication Workshops – coating compatible fabricated components after appropriate surface preparation.

🚪 Gate & Grill Fabrication – useful for applying powder to suitable metal gates, grills and frames.

🪑 Metal Furniture Production – suitable for compatible furniture frames and components.

⚙️ Machinery Components – useful for coating appropriately prepared metal parts.

🔧 Engineering Workshops – practical for component finishing and fabrication projects.

🏗️ Manufacturing & Production – suitable for repeated powder-application work where the machine’s specifications meet production requirements.

Powder Coating Process

A proper powder-coated finish depends on more than the coating machine alone. A typical workflow involves:

Surface Preparation → Powder Application → Curing → Cooling & Inspection

Correct cleaning and surface preparation are especially important because oil, rust, dirt or other contamination can affect coating adhesion and finish quality.

The applied powder also requires the appropriate curing process according to the specific powder manufacturer’s instructions.

Usage & Safety Notes

• Prepare and clean the workpiece properly before coating
• Use powder specifically intended for the required coating application
• Follow the powder manufacturer’s application and curing instructions
• Maintain appropriate ventilation and powder-control measures
• Use suitable personal protective equipment
• Avoid inhaling airborne powder
• Keep ignition sources away where required by the powder manufacturer’s safety information
• Ensure appropriate grounding/earthing of the coating system and workpiece according to manufacturer instructions
• Keep the 4m gun cable away from damage, excessive heat and sharp edges
• Keep powder material clean and protected from contamination
• Do not exceed the specified machine capacity
• Clean the system correctly when changing powder types or colours
• Follow Toller operating, cleaning and maintenance procedures

Mini FAQ

What is the capacity of this powder coating machine?
It has a specified capacity of 50 litres.

What is its powder output?
The machine is specified at 500g/min.

How long is the gun cable?
It comes with a 4-metre gun cable.

What is the machine mainly used for?
It is designed for applying powder coating to compatible prepared surfaces, particularly metal components and fabricated products.

Can it be used for gates and metal furniture?
Yes, appropriately prepared compatible gates, frames and metal furniture components are relevant applications.

Does powder coating require curing?
Yes. Applied powder normally requires an appropriate curing process according to the coating powder manufacturer’s specifications.

Does the machine include a curing oven?
A curing oven was not specified as part of the supplied product details and should not be assumed to be included.

What electrical supply does it require?
The electrical specifications were not supplied and should be confirmed from the Toller nameplate or technical documentation before installation.

Why Buy from Macire

• 50L Toller Powder Coating Machine
• Defined 500g/min powder output
• 4m gun cable for useful working reach
• Suitable for compatible metal-finishing applications
• Practical for fabrication and engineering workshops
• Suitable for repeated powder-coating operations
• Nationwide delivery
• After-sales product support

Visit us: Kenafric Business Park, Ruaraka, Nairobi
WhatsApp: 0750 00 66 00
Calls: 0713 520 969 / 0718 762 530
Website: Macire