Toller Automatic Pump Control – Automatic Water Pump Pressure Controller

The Toller Automatic Pump Control is a practical control unit designed to automate the operation of compatible water pumps, reducing the need to manually switch the pump on and off during normal water use.

Installed as part of a correctly configured water-pumping system, the controller responds to water demand and system pressure conditions to manage pump operation automatically. When water is required, the system can activate the connected pump and stop it when demand ends, subject to the controller’s operating design and installation requirements.

This makes the Toller Automatic Pump Control particularly useful for domestic water supply, tank-to-house pumping, booster-pump systems and general pressurised water distribution.

For homes, small commercial premises and water installations requiring convenient pump automation, it provides a simple way to convert a compatible manually operated pump into a more responsive automatic water-supply system.

Technical Specifications

Key Features

• Automatic pump start and stop control
• Designed for compatible water-pumping systems
• Responds to water demand and pressure conditions
• Reduces manual pump switching
• Suitable for domestic water-supply systems
• Practical for tank-to-house water pumping
• Suitable for compatible booster-pump installations
• Helps provide convenient automatic water delivery
• Compact control solution for pump automation
• Suitable for residential and light commercial water systems

Applications / Use Cases

🏠 Domestic Water Supply – automates compatible pumps supplying water around homes and residential properties.

🚰 Tank-to-House Pumping – useful where water is pumped from a storage tank into a pressurised household distribution system.

💧 Booster Pump Systems – suitable for compatible installations where a pump is used to improve water delivery and pressure.

🏢 Small Commercial Premises – practical for compatible water-supply systems in offices, shops and similar properties.

🌿 General Water Distribution – can automate suitable pumps used in appropriately configured water-transfer and distribution systems.

Automatic Start & Stop Advantage

The key benefit of the Toller Automatic Pump Control is its ability to manage pump operation automatically.

Instead of manually turning the pump on whenever water is required, the controller works with the pumping system to respond to demand.

When correctly installed, this creates a more convenient water-supply arrangement for taps, showers and other compatible water outlets.

Water Pressure Control Advantage

The controller is intended for use within a pressurised water-pumping system.

When water demand changes, the controller manages the connected pump according to its operating parameters.

This is particularly useful in installations where a pump transfers water from a storage source and supplies it directly into a household or building’s water-distribution network.

Exact start pressure, stop behaviour and pressure limits should be confirmed from the specific Toller controller’s technical specifications.

Pump Automation Advantage

Adding automatic control can make a compatible pump much easier to operate.

A typical installation may consist of:

Water Source → Pump → Toller Automatic Pump Control → Building Water System

The controller handles pump switching based on system conditions, while the pump provides the actual water movement and pressure.

Correct installation and compatibility are essential for reliable operation.

Tank-to-House Water Supply Advantage

The Toller Automatic Pump Control is particularly useful where water is stored in a tank and then pumped into a home or other building.

In this type of installation, the controller can help provide on-demand pump operation, allowing the pump to operate when water is being used rather than requiring manual switching each time.

Actual performance will depend on the connected pump, available water supply, pipework and complete system design.

Usage & Installation Notes

• Confirm compatibility with the connected water pump
• Verify the controller’s voltage and electrical ratings before installation
• Confirm the pump does not exceed the controller’s permitted load
• Follow the indicated water-flow direction during installation
• Install according to the manufacturer’s orientation requirements
• Ensure pipe connections are properly sealed
• Check the system for water leaks
• Ensure the pump has an adequate water supply
• Prime the connected pump where required
• Do not operate a pump under unsuitable dry conditions
• Check that the system can develop the pressure required by the controller
• Use appropriate electrical protection and earthing
• Keep electrical connections protected from inappropriate water exposure
• Have electrical connections completed by a qualified technician
• Follow the Toller installation instructions before commissioning

Mini FAQ

What does the Toller Automatic Pump Control do?
It is designed to automatically control the start and stop operation of a compatible water pump according to water demand and system conditions.

Can it eliminate manual pump switching?
Yes. Automatic operation is its primary purpose when correctly installed with a compatible pump.

Can I use it for tank-to-house water supply?
Yes. It is suitable for compatible systems where a pump supplies water from a storage tank into a household or building water network.

Is it suitable for booster pumps?
It can be used with compatible booster-pump systems provided the pump’s electrical and hydraulic specifications meet the controller’s requirements.

What voltage does it use?
The voltage was not provided in the supplied product information and should be confirmed from the Toller controller nameplate or technical specifications.

Does it have dry-run protection?
That feature was not specified in the supplied product information, so it should be confirmed from the particular Toller Automatic Pump Control model before advertising it as a feature.

Can it work with any water pump?
Not necessarily. The pump’s electrical rating, pressure characteristics, flow requirements and installation configuration must be compatible with the controller.

Why Buy from Macire

• Toller Automatic Pump Control
• Convenient automatic pump operation
• Designed for compatible pressurised water systems
• Practical for tank-to-house water supply
• Suitable for domestic and booster-pump applications
• Reduces the need for manual pump switching
• Nationwide delivery
• After-sales product support

Visit us: Kenafric Business Park, Ruaraka, Nairobi
WhatsApp: 0750 00 66 00
Calls: 0713 520 969 / 0718 762 530
Website: Macire