⚡ 110kW 3-Phase Hober Solar Pumping Hybrid Inverter – Intelligent Power for High-Volume Pumping

Power Meets Precision | Solar Smart | Trusted by Macire Experts

Take control of your large-scale irrigation, water pumping, or industrial fluid movement with the 110kW 3-Phase Hober Solar Pumping Hybrid Inverter, proudly available from Macire ????. Designed for high-efficiency solar utilization, grid and generator compatibility, and rugged 3-phase output, this inverter delivers unmatched performance in agricultural, industrial, and commercial pumping operations.

With intelligent MPPT tracking, soft start motor protection, and hybrid switching, the _Macire-supplied Hober 110kW inverter empowers farmers, factories, and institutions to save fuel, reduce costs, and extend pump lifespan — all while going green! ????

✅ Key Features & Benefits

???? Massive 110kW Solar Capacity
➤ Drives 3-phase pumps for irrigation, boreholes, and industrial water systems effortlessly.

???? Hybrid Function (Solar + Grid + Generator)
➤ Automatically switches between solar and backup power for uninterrupted operation.

⚙️ Built-in MPPT Controller (99% Efficiency)
➤ Extracts maximum power from your solar panels even under cloudy or fluctuating sunlight.

???? Soft Start & Motor Protection
➤ Increases lifespan of your pump by preventing high voltage surges at startup.

???? Three-Phase AC Output
➤ Ideal for 3-phase submersible, centrifugal, or surface pumps.

???? Automatic Start/Stop Control
➤ Programmable for daily watering cycles – zero manual intervention.

???? Remote Monitoring (Optional)
➤ Monitor inverter performance via app or web dashboard (Wi-Fi/GPRS modules optional).

???? IP65 Outdoor-Proof Enclosure
➤ Dust-tight and weather-resistant – no control room needed!

???? Technical Specifications

???? Application Areas

The 110kW Hober Hybrid Inverter from Macire is best suited for:
???? Large-Scale Drip or Sprinkler Irrigation ????
???? Borehole Pumping (up to 100m deep) ????
???? Commercial Farms & Agro-Industries ????
???? Industrial Water Circulation & Drainage ????
???? Fish Farming & Aquaculture Systems ????
???? Greenhouse & Horticultural Watering ????
???? Public Institutions & Water Supply Projects ????

????️ Maintenance Tips – Maximize Longevity

Ensure smooth operation and maximize the return on your investment by following these Macire maintenance tips:

✔️ Clean solar panels weekly – Dust or debris reduces performance.
✔️ Check inverter ventilation – Remove dust from air inlets/fans.
✔️ Tighten all cable terminals monthly – Prevent arcing or heat buildup.
✔️ Inspect display for errors – Follow warnings or status codes immediately.
✔️ Protect from water pooling/flooding – Even though it’s IP65-rated, keep area dry.
✔️ Use surge protectors if connected to generators or unstable grids.

???? DIY Guide: Installation & Use

1. ???? Mount inverter on a firm, vertical wall in a shaded location.

2. ???? Connect solar array (up to 850V) to the DC input terminals.

3. ⚡ Connect 3-phase AC pump wires to output terminals.

4. ???? Program operation times, start/stop parameters, and dry run protection.

5. ☀️ When sunlight is adequate, inverter auto-starts pump via solar.

6. ???? In case of low solar power, it will switch to generator or grid automatically.

❌ Do’s & Don’ts

✅ DO:
✔️ Ensure correct wiring of 3-phase output
✔️ Use quality, oversized solar cables
✔️ Check pump specs compatibility before installation
✔️ Install surge protection for safety

❌ DON’T:
✖ Connect to batteries – this inverter is not for storage use
✖ Exceed voltage limits of solar input
✖ Operate pump without proper earthing
✖ Expose inverter to direct rainfall without elevation

???? Performance Output (What It Can Power)

???? Example Performance Table – Assuming 80% Solar Efficiency with 110kW Output:

➡️ Figures above are based on a solar array of approx. 130–140kW with 6+ hours of peak sun (Kenya/Nairobi zone). Output may vary by location, weather & panel cleanliness.

❓ FAQs

Q1: Can it run a 3-phase 100HP borehole pump?
A: Yes, 110kW = ~147HP, so it’s well within range. Just ensure voltage compatibility.

Q2: Does this inverter work with grid and solar together?
A: Absolutely! It switches automatically depending on which source is available.

Q3: Can I use it with battery storage?
A: No. It’s a hybrid solar/grid/genset inverter, not for battery-based systems.

Q4: How long does it take to install?
A: With a qualified technician, about 2–4 hours including commissioning.

Q5: Is remote monitoring available?
A: Yes – optional WiFi or GPRS modules are supported for online dashboards.

???? What’s Included in the Box

• 1x 110kW Hober Solar Pumping Hybrid Inverter

• User Manual & Wiring Diagram

• Mounting Kit

• Technical Support from Macire Team

• 12-Month Warranty (Extendable)

???? Why Choose Macire?

✅ Genuine Hober Brand from Official Channels
✅ Technical Support & Wiring Assistance
✅ Competitive Pricing on Solar Accessories
✅ Delivery & Setup Available
✅ Proudly Serving Kenya & East Africa

???? Visit us today at Macire Limited, Barkat Biashara Mall – Kumasi Rd, Nairobi.
???? Call/WhatsApp: +254 718 762 530
???? Order Online: www.macire.co.ke
???? #MacireInverters #HoberKenya #SolarPumpInverter #HybridInverter #110kWHober #3PhaseIrrigationInverter #MacireLimited #GoSolarWithMacire #SolarWaterInverter #HoberHybridInverter

110kW 3-Phase Hober Solar Pumping Hybrid Inverter ⚡????????
???? Powerful Solar Pump Inverter | ⚙️ MPPT | ???? Hybrid with Generator/Grid

???? 110kW Three-Phase Pumping Output
???? Solar + Grid + Genset Switching
???? Soft Start & Pump Protection
???? MPPT Efficiency up to 99%
???? Outdoor Rated – IP65
???? Remote Monitoring Option
???? Ideal for Boreholes, Irrigation, Industry

???? Available Now at Macire – Order Today!
???? +254 718 762 530 | ???? www.macire.co.ke
???? #HoberInverter #SolarPumpingKenya #MacireLimited #HybridSolarPump #110kWHober #3PhaseSolarInverter #MacirePowerSolutions